WB O2 Connections - ZR-1 Net Registry Forums

XfireZ51 · 03-09-2008

If you have installed a WB O2 in your ZR, I'd be interested in knowing where you made the connections. Once I'm done with plenum and head port matching, I'll need to re-do WOT fueling, I am sure. I'll be using a Zeitronix ZT-2. With the display I'll be showing MAP, AFR, and TPS. Would like to know:
1. where you have grounded sensor?
2. connected switched power?
3. Todd told me there is a tachometer takeoff by the master cylinder
4. If your WB is permanently installed, which way did you route
cabling thru to cabin?

03-09-2008	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	WB O2 Connections If you have installed a WB O2 in your ZR, I'd be interested in knowing where you made the connections. Once I'm done with plenum and head port matching, I'll need to re-do WOT fueling, I am sure. I'll be using a Zeitronix ZT-2. With the display I'll be showing MAP, AFR, and TPS. Would like to know: 1. where you have grounded sensor? 2. connected switched power? 3. Todd told me there is a tachometer takeoff by the master cylinder 4. If your WB is permanently installed, which way did you route cabling thru to cabin?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode