|
|
|
01-25-2005
|
#1 |
 Join Date: Jan 2005
Location: Slidell, LA
Posts: 9
|
Ported plenum,injector housings,air horn & 63mm throttle
Topic says it all!
All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it! 985-960-2483 EES, Inc. EES, Forums. |
|
|
|
01-27-2005
|
#2 | |
|
Join Date: Jan 2005
Location: lynn massachussettes
Posts: 1
|
Re: Ported plenum,injector housings,air horn & 63mm thro
Quote:
|
|
|
|
|
|
01-28-2005
|
#3 |
|
Join Date: Jan 2005
Location: Slidell, LA
Posts: 9
|
You should see anywhere from 400-415rwhp with what you just stated.
__________________
[url=www.acsvette.com]EES, Inc.[/url] [url=http://eesvette.hyperboards.com/index.cgi] EES, Forums.[/url] |
|
|
|
|
01-28-2005
|
#4 | |
 
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: Ported plenum,injector housings,air horn & 63mm thro
Quote:
With what you have, plus headers and a good tune, you might reach 400rwhp |
|
|
|
|
|
01-28-2005
|
#5 | |
|
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: Ported plenum,injector housings,air horn & 63mm thro
Quote:
Do you have any pictures, and what if the potential buyer does not have any cores? |
|
|
|
|
|
01-29-2005
|
#6 |
Join Date: Jan 2005
Location: Orangevale, CA
Posts: 6
|
plenum
I have the rest of the motor that this plenum came off of. Is it still available?
|
|
|
|
|
01-29-2005
|
#7 | |
|
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: plenum
Quote:
Your post really has me confused. What exactly do you mean
|
|
|
|
|
|
01-31-2005
|
#8 |
|
Join Date: Jan 2005
Location: Orangevale, CA
Posts: 6
|
plenum
What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available.
|
|
|
|
|
01-31-2005
|
#9 | |
|
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: plenum
Quote:
I would suggest you email/PM the person in question for an answer to your question. |
|
|
|
|
|
02-01-2005
|
#10 |
|
Join Date: Jan 2005
Location: Slidell, LA
Posts: 9
|
Re: plenum
The parts are still available. I thought I had them sold but the guy backed out at the last minute.
Mike
__________________
[url=www.acsvette.com]EES, Inc.[/url] [url=http://eesvette.hyperboards.com/index.cgi] EES, Forums.[/url] |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
