1990- Oil pressure guage>> - ZR-1 Net Registry Forums

ZR1Vette · 01-26-2008

Just curious..where does the your (obviously the ZR-1) oil pressure guage sit when first start up? After warm up at idle? and at lets say 4K rpm? Mine seems to sit at about 3/4 up on the guage constant except at higher rpms a couple ticks below 80. New oil, filter etc so am just wondering if the gauage reading is the normal mode?
Michael

lbszr · 01-26-2008

Haven't ran mine for about a month

but seems hot it's about 40 at idle and 60 to 70 at anything above idle, mine was running just a hair under 80 all the time , it was the transmitter which I've heard is a common problem if it's the original one, if there's oil in the electrical connection like mine had it's bad for sure, could screw a mechanical indicator in if your not sure if it's accurate incase there's nothing wrong.

ZR1Vette · 01-26-2008

I began reading about the some what common pressure sender issue...where is the oil pressure sensor sending unit located?
Michael

lbszr · 01-26-2008

It's just inboard of the right water outlet pipe on the oil filter adapter sitting vertical, plug is easy to pull off and look for oil, one of the easiest things to get to.

ZR1Vette · 01-26-2008

Got it! Good info and big thanks
Michael

bradslt5 · 01-26-2008

i had an interesting thing happen recently. changed the oil and filter and the pressure wnt down on the gauge alot . to half way when hot . scared me a bunch . got another filter screwed it on and poof things were back to normal. anyone had this happen to them also?

01-26-2008	#1
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	1990- Oil pressure guage>> Just curious..where does the your (obviously the ZR-1) oil pressure guage sit when first start up? After warm up at idle? and at lets say 4K rpm? Mine seems to sit at about 3/4 up on the guage constant except at higher rpms a couple ticks below 80. New oil, filter etc so am just wondering if the gauage reading is the normal mode? Michael

01-26-2008	#2
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 425	Re: 1990- Oil pressure guage>> Haven't ran mine for about a month but seems hot it's about 40 at idle and 60 to 70 at anything above idle, mine was running just a hair under 80 all the time , it was the transmitter which I've heard is a common problem if it's the original one, if there's oil in the electrical connection like mine had it's bad for sure, could screw a mechanical indicator in if your not sure if it's accurate incase there's nothing wrong. __________________ [FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]

01-26-2008	#3
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: 1990- Oil pressure guage>> I began reading about the some what common pressure sender issue...where is the oil pressure sensor sending unit located? Michael

01-26-2008	#4
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 425	Re: 1990- Oil pressure guage>> It's just inboard of the right water outlet pipe on the oil filter adapter sitting vertical, plug is easy to pull off and look for oil, one of the easiest things to get to. __________________ [FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]

01-26-2008	#5
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: 1990- Oil pressure guage>> Got it! Good info and big thanks Michael

01-26-2008	#6
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: 1990- Oil pressure guage>> i had an interesting thing happen recently. changed the oil and filter and the pressure wnt down on the gauge alot . to half way when hot . scared me a bunch . got another filter screwed it on and poof things were back to normal. anyone had this happen to them also?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode