Track Results Part II

[Pete]

Went to the track today thinking might be the last for the season was hoping to break my previous best.
I did get my best MPH.

Baro was down.
Temps 55-60
1.70 60ft 11.41 @ 124.53
1.72 60ft 11.37 @ 124.98

Last year i ran a best of 1.69 60ft 11.35 @ 123.7 at a different track.

I also figured out the car will not 60ft any better the BFG DR's hook very good no metter what RPM i luanch 4k 5k don't metter the 3.45 gears slow it down,need 4.10 gears or another 30HP to shoot for 10's maybe next year i'll try 4.10's i have a few more tricks to try for more power maybe a 10 second pass from a 350ci LT5 :-)
Maybe yank my A/C since i can't remember the last time i used it,for some weight savings.

Three C6 ZO6's there today one was running 125 MPH talked to the guy for a bit had just a tune making 478 RWHP nice freaking car.

The auto ZR-1 ran good today all his runs were in the 10's with CATS
small cams, passed emissions with flying colors.

Pete

[-=Jeff=-]

Hey Pete I heard about your track day!!! I also heard about that Slow ZR-1 running 10s...

Nice times!!!

[FU]

Way to go Pete ! The "other" car is an automatic ? Nice.

[XfireZ51]

Pete,

Nice Numbers. Lee and I had a pretty good day at Byron but they still have a big difference between left and right lanes. Wonder if anyone else has had the problem with their 1/8 mph numbers? You should put a WB 02 on that motor and run it down the track.

[Pete]

Originally Posted by XfireZ51

Pete,

Nice Numbers. Lee and I had a pretty good day at Byron but they still have a big difference between left and right lanes. Wonder if anyone else has had the problem with their 1/8 mph numbers? You should put a WB 02 on that motor and run it down the track.

Thanks Dom, heard you ran pretty good Saturday.
Byron's been like that since last year, obviously they don't care.

Pete

[XfireZ51]

Originally Posted by Pete

Thanks Dom, heard you ran pretty good Saturday.
Byron's been like that since last year, obviously they don't care.

Pete

Pete,

I need to get your ball to you. I tried it on the IHs I bought from Uncle Robin. The 36.5mm ball makes it down some of them and others its a pretty tight fit. The plenum will need to be completely done along with the head/IH area.

[Pete]

Originally Posted by FU2

Way to go Pete ! The "other" car is an automatic ? Nice.

Thanks Frank

Hey Frank what's wrong with the LSV,hope nothing major i really like that LSV especially the color

Pete

[FU]

Originally Posted by Pete

Thanks Frank

Hey Frank what's wrong with the LSV,hope nothing major i really like that LSV especially the color

Pete

You have been "polishing" that car for a long time Pete , and earned every bit of the perfomance of it

The LSV is @ 50 HP down. Very poor performance. Marc has that one too. Putting Corsa's on it , shes a cruiser.

The LSV is headed to the NCM for display after Marc finish's it. The white car will be done soon . They have a new silver stablemate.