ZR1 brake lines

[jordizr1]

Hi, just want to know if the zr1 brake lines are the same as any standard C4, hi have brembos with steel lines, and a friend wants to know where to order just steel braided brake hoses to fit the standard ZR1 calipers in his car.

[Sgreg]

This is open to debate but I would say not exactly. The fronts are the same but the backs on a true ZR1 brake line are just a little longer than a standard C-4. Ever noticed that many manufacturers will say all C-4 Corvettes ( exc. ZR1) ? The extra length in the rear line on Z lines makes installation easier. Having said all of this, it is possible to route the C-4 rears to fit. Confused ?

[gbrtng]

Originally Posted by Sgreg

This is open to debate but I would say not exactly. The fronts are the same but the backs on a true ZR1 brake line are just a little longer than a standard C-4. Ever noticed that many manufacturers will say all C-4 Corvettes ( exc. ZR1) ? The extra length in the rear line on Z lines makes installation easier. Having said all of this, it is possible to route the C-4 rears to fit. Confused ?

This got thrashed around on the zr1net some years back and I don't remember the outcome. I find it hard to believe the ZR-1 rear is any different because the frame and calipers are the same. The best way to check is see if GM lists a different part number for the ZR-1. I tried Russell lines and couldn't get them to seal even though they were long enough. The ones from Movit work fine, as do the ones I got from Rippie. I prefer the Movit ones; not sure of the maker but they are/were European with TUV certification, and all four were the same length. Holler if you need more and I'll check the trailer toolbox ...

Glenn

[XfireZ51]

I just did this upgrade a month ago. I actually used lines that said
non-ZR-1. The lines were Russells and they fit just fine. No problems.

[petefias]

Originally Posted by Sgreg

This is open to debate but I would say not exactly. The fronts are the same but the backs on a true ZR1 brake line are just a little longer than a standard C-4. Ever noticed that many manufacturers will say all C-4 Corvettes ( exc. ZR1) ? The extra length in the rear line on Z lines makes installation easier. Having said all of this, it is possible to route the C-4 rears to fit. Confused ?

It's real simple. The ZR1 has wider wheels and the extra length allows a little more room to clear the tires.

[gbrtng]

Originally Posted by petefias

It's real simple. The ZR1 has wider wheels and the extra length allows a little more room to clear the tires.

All the extra tire and wheel width is on the outside; clearance on the inside should be the same.

[evl_twn]

I put the Russell lines on mine last year, no problems...

[petefias]

Originally Posted by gbrtng

All the extra tire and wheel width is on the outside; clearance on the inside should be the same.

To determine if ALL the extra width is on the outside or some is on the inside we need the offset for the standard wheel and the ZR1 wheel. We know the offset for the ZR1 wheel is 36mm for the rear and 56mm for the front.

Do you know what is the offset on the standard C4 wheel, or are you just guessing?

Originally Posted by petefias

To determine if ALL the extra width is on the outside or some is on the inside we need the offset for the standard wheel and the ZR1 wheel. We know the offset for the ZR1 wheel is 36mm for the rear and 56mm for the front.

Do you know what is the offset on the standard C4 wheel, or are you just guessing?

Standard wheel is the same size/offset as the ZR-1 front.

There probably is a line difference, but it is negligable in the aftermarket hoses. Just make sure you get them pointed away from the tire when you tighten them down.