|
|
|
09-29-2007
|
#1 |
 
Join Date: Oct 2006
Location: Virginia Beach
Posts: 46
|
Bad amps?
Just to sanity check before I go ordering new parts, what are the symptoms of the amps going bad? Right now I have a constant, heavy, static noise coming from both the front speakers. It's present as soon as the power is turned on, and bad enough that you have to crank the volume just to hear anything.
__________________
1991 Red / Black SLP Intake / Haibeck Chip / B&B Catback |
|
|
|
09-29-2007
|
#2 |
 
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: Bad amps?
It could be a couple of things, but is most likely you amps going bad.
This thread from the audio section has a few places to consider. http://zr1netregistry.com/forum/showthread.php?t=643 
|
|
|
|
|
10-05-2007
|
#3 |
Join Date: Nov 2004
Posts: 38
|
Re: Bad amps?
I used the amps out of a Nissan that had a BOSE system when my rear amps dies. I ended up swapping everything over including the new speakers etc and retained the ZR1 speaker/amp casing. Fit's like a glove. The speakers came out of a 2005 Pathfinder but almost any year should work provided it came with the BOSE system.
__________________
1990 ZR1 Ported Intake, IH's and PC'd (JeffVette), 4:10's, SLP air intake, SW headers, X-pipe with flowmasters. Haibeck chip. 12.1 @117mph on GSD-3's. :mrgreen: |
|
|
|
|
10-05-2007
|
#4 |
Join Date: Jul 2006
Location: Tennessee
Posts: 116
|
Re: Bad amps?
Same Day Auto Audio
757-277-1080 And the best part, they are local to you in Chesapeake. |
|
|
|
|
10-06-2007
|
#5 |
|
Join Date: Oct 2006
Location: Virginia Beach
Posts: 46
|
Re: Bad amps?
Chesapeake - good to know that. I was about to start boxing up stuff to send to Bose.
__________________
1991 Red / Black SLP Intake / Haibeck Chip / B&B Catback |
|
|
|
|
12-07-2007
|
#6 |
|
Join Date: Jun 2007
Location: Pensacola, Florida
Posts: 14
|
Re: Bad amps?
My amps went out. I called Bose, they sent me 4 new ones, at $75.00 each, plus shipping. They did not want my old ones. I changed all 4 out in 3 hours. You can get instructions on this site. I bought instructions for $10, on the internet from a site mentioned in ZR1registry.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
