|
|
|
08-11-2007
|
#1 |
|
Join Date: Aug 2005
Location: San Fernando Valley, CA.
Posts: 896
|
Wiring in manual fan switch-Splice into which wires?
On a 90.....
I bought the switch from Mid America, of course I lost the directions. Everything is done and the wiring is run up to the relays. Which wires am I soddering into to ground the switch to kick each fan on? Im inclined to believe the blue/black and the blue/white, but I want to make real sure.
__________________
1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj. |
|
|
|
08-11-2007
|
#2 |
|
Join Date: Aug 2005
Location: San Fernando Valley, CA.
Posts: 896
|
Re: Wiring in manual fan switch-Splice into which wires?
...Im guessing we are short staffed tonight? Somebody hum me a tune at least. Dirt clod fight, poke in the eye? Anything.
...TTT.....Oh wait I already am. Ok, I give. 
__________________
1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj. |
|
|
|
|
08-11-2007
|
#3 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Wiring in manual fan switch-Splice into which wires?
I'm pretty sure it's the blue wires on the relays.
It's been a while i will have to look tomorrow and tell excactly which one to ground or run to a switch with a ground. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
08-11-2007
|
#4 | |
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
|
Re: Wiring in manual fan switch-Splice into which wires?
Quote:
Good memory! Had to look at book for me. It shows BLU/BLK on both and terminal F on the relay. My first first switch from MID lasted a while and one of the contacts failed so only one fan ran, they sent me another with no problem, good service. Only the second switch was wired so both wires were on in both positions. So I just jumpered the wires together at switch on the old one so both fans run when turned on without the one fan option. Instead of installing the new one just to be done with it. Just thought I'd let you know in case both your fans run in both switch postions. In case the switches are still wired that way. Hope my rambling makes sense  http://i188.photobucket.com/albums/z...6/File0232.jpg
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT] |
|
|
|
|
|
08-11-2007
|
#5 |
|
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
|
Re: Wiring in manual fan switch-Splice into which wires?
Also the link of the WDM
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT] Last edited by lbszr; 08-11-2007 at 01:11 PM. |
|
|
|
|
08-11-2007
|
#6 |
|
Join Date: Aug 2005
Location: San Fernando Valley, CA.
Posts: 896
|
Re: Wiring in manual fan switch-Splice into which wires?
So I should run both wires to the one relay with the blue/black or just one to the blue/black and one to the blue white so I can choose between fans?
In normal op both fans come on at the same time .Dont know if they are all like this or if Haibeck programmed it to run like this? Im only going to use it for cool down between runs at the track.
__________________
1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
