|
|
|
07-21-2007
|
#1 |
Join Date: Aug 2006
Location: San Diego, CA
Posts: 24
|
ACCEL injectors
Greetings all. Just wondering if anyone has a comment on this:Just read Roger E's post about using the outer slot on the injector for the clip to the fuel rail (the slot next to the o-ring?) I just pushed them into the rail and used the slots that look like they were made for the clip. There were no leaks and it runs fine. Does anybody know how much difference this makes? Should I worry?
__________________
1990 #1507 Black/Grey/flowmaster-DRM chip |
|
|
|
07-21-2007
|
#2 |
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: ACCEL injectors
Don't worry about it, you did it right. Did mine the same way...
Hans
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
07-23-2007
|
#3 |
|
Join Date: Aug 2006
Location: San Diego, CA
Posts: 24
|
Re: ACCEL injectors
Thanks Hans. I'll sleep better now. Looks like our cars were born very close together.
George
__________________
1990 #1507 Black/Grey/flowmaster-DRM chip |
|
|
|
|
07-25-2007
|
#4 | |
 
Join Date: Nov 2006
Location: DeBary , Fl.
Posts: 119
|
Re: ACCEL injectors
Quote:
Gene in Fl. |
|
|
|
|
|
07-26-2007
|
#5 |
Join Date: Jun 2006
Location: Thunderbolt, Ga.
Posts: 253
|
Re: ACCEL injectors
Are these accel injectors replacements for the primaries?
__________________
IT IS THE FATE OF THE INNOCENT TO MEET WITH DEATH!!! |
|
|
|
|
07-27-2007
|
#6 | |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: ACCEL injectors
Quote:
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
|
07-27-2007
|
#7 |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: ACCEL injectors
The Accels fit both the primaries and the secondaries. Marc Haibeck swears by them, I was just over at his shop last week. He also confirmed that they are stainless steel.
The bypass is relatively simple. Just undo the coolant hoses that go to either side of the throttle housing. Remove the hoses and run a single hose from one coolant line to the other under the front of the plenum. I'll snap a picture of mine and post it so you can see. Hans 
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
