|
06-12-2024 | #1 |
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
1992 Upper Radiator Shroud Removal
Help with upper radiator shroud remova;
- all fasteners removed - see attached screenshot Upper radiator shroud seems stuck to radiator. When I pry up on driver's side flange with some force, the shroud will raise 1/2 inch, but that's it. Did I miss some fasteners or ? Thanks in advance, Gary .... |
06-12-2024 | #2 |
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
|
Re: 1992 Upper Radiator Shroud Removal
Did you get the 3 on each side? 8mm head.
Also 2 on each side down by the frame rails. Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige |
06-12-2024 | #3 |
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
Re: 1992 Upper Radiator Shroud Removal
Subfixer,
Thanks for info. Just found the drawing that shows 3 on each side - see screenshot. Question - how in the heck do you get to those? Do you have to take the air pump off on the driver's side? Thanks, Gary .... |
06-12-2024 | #4 |
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
|
Re: 1992 Upper Radiator Shroud Removal
Yes. I had to remove the air pump to get to mine
Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige |
06-13-2024 | #5 |
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
Re: 1992 Upper Radiator Shroud Removal
Subfixer,
Any secret steps/processes to removing the air pump? Don't have a lift, so I'll have to jack it up and use a jack stand. Thanks, Gary .... |
06-13-2024 | #6 |
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
|
Re: 1992 Upper Radiator Shroud Removal
If I remember correctly, it was just a couple of bolts. I disconnected everything from the top. Remove the hoses from the pump. It doesn't need to move far.
Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige |
06-14-2024 | #7 |
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
Re: 1992 Upper Radiator Shroud Removal
Subfixer,
Thanks. Will give it a go. Gary .... |
06-15-2024 | #8 |
Join Date: Oct 2019
Location: Mansfield, TX
Posts: 148
|
Re: 1992 Upper Radiator Shroud Removal
Subfixer,
How did you go about getting the 3 8mm screws/bolts out on the passenger side? Did you use a flexible long extension or ? Those screws/bolts are very akward for this old man to get to. Your help is much appreciated. Thanks, Gary .... |
06-15-2024 | #9 |
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
|
Re: 1992 Upper Radiator Shroud Removal
Yes. Very hard to get them. I used a small 8mm wrench for the ones I couldn't get with a 1/4 " drive ratchet, extension and universal joint.
Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige |
06-15-2024 | #10 |
Join Date: Sep 2018
Location: Groton, CT
Posts: 382
|
Re: 1992 Upper Radiator Shroud Removal
Once all the bolts are out, the next challenge will be getting it out from under the AC and oil cooler lines.
Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige |
Thread Tools | |
Display Modes | |
|
|