|
12-03-2020 | #1 |
Join Date: Oct 2020
Location: Middleboro, MA
Posts: 19
|
Sitting in a C4Z..
Sat in a C4 yesterday for the first time since I was young, and how the hell do you guys fit? I'm a bigger than average guy (competitive strength athlete) so I understand everything is a tighter fit for me than most, but is the ZR1 any roomier with its extra width? Im ready to pull the trigger on a real nice one, but Im having second thoughts as I was having a real hard time moving around..
|
12-03-2020 | #2 |
Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,045
|
Re: Sitting in a C4Z..
Yes...You will notice when you sit in a ZR1..
|
12-03-2020 | #3 |
Join Date: Oct 2020
Location: Middleboro, MA
Posts: 19
|
Re: Sitting in a C4Z..
|
12-03-2020 | #4 | |
Join Date: Nov 2016
Location: New Brunswick
Posts: 961
|
Re: Sitting in a C4Z..
Quote:
Anyhow, I own a C3 and tried C5 and C6, and the C4 was the only one I could get comfortable in. I could manage the C5 Convertible, but not the coupe or hard top. In the C6, my legs were crunched pretty hard against the lower dash. Anyway, the sun is shining and the sky is blue. About an hour of work to do, but then 996 will get another good run!
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
12-03-2020 | #5 |
Join Date: Dec 2003
Posts: 477
|
Re: Sitting in a C4Z..
The earlier cars have different seats than the later cars. I understand the later seats are more accommodating.
George |
12-03-2020 | #6 | |
Join Date: Oct 2020
Location: Middleboro, MA
Posts: 19
|
Re: Sitting in a C4Z..
Quote:
Enjoy that 996!!!! |
|
12-03-2020 | #7 |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,593
|
Re: Sitting in a C4Z..
If height is not the issue, using a seat cushion can raise you up enough to make the seat feel roomier side to side as it raises you to the wider part of the seat. ( I know, I know, no one likes the look and neither do I, but it works.) A cushion with a back to it moves you forward enough so that you are in a wider part of the seatback as well.
Also, make sure if they are sport seats, that you have the bolsters opened all of the way out. I am surprised how many miss that when first looking at my ZR-1s and sitting in them. When I open them up and have them re-enter, they smile and say that it made it much more comfortable. I find the C-4 to be sufficiently roomy for most. The problem usually is the drop down to get in, and worse, trying to get up and out for quite a few folks. Dropping the side rail down in the C-5 mitigated that problem, although many still feel they are getting down on the ground in those as well, but without the high stepover. C-6's remain the winner for most, but we don't necessarily buy them for the room. C-7's claim more interior volume, which may be true, but that aircraft carrier they call a console sure seems to take up all of the added volume. Once in a C-4, most feel they are quite comfortable, although guys with size 12's and up find the footwell to be awfully confining. Once you take an entrance or exit ramp at 70, you will learn to enjoy those C-4 sport seats more and more. Best of luck in your search!! Marty |
12-03-2020 | #8 |
Join Date: Nov 2016
Location: New Brunswick
Posts: 961
|
Re: Sitting in a C4Z..
I'm not a thin guy either, but likely not as broad as you are. Do you know which seats you were sitting in? The sport seats are dramatically more snug then the base ones. The 1994 onward C4's have a much more open seats design, so you may want to try one of those.
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
12-04-2020 | #9 |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: Sitting in a C4Z..
On the interior, there is no difference in the width of the base C4 and the ZR-1 that I have ever been able to tell. I believe the difference is the doors and rear quarter panels are wider, not the main body of the car.
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
12-04-2020 | #10 |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,593
|
Re: Sitting in a C4Z..
|
Thread Tools | |
Display Modes | |
|
|