|
04-25-2007 | #1 |
Join Date: Mar 2006
Location: Innsbrook, Missouri
Posts: 1,727
|
Haibeck, tuned, it's back, Ready for Bowling Green
I thought i'd post some thoughts on my car, how little things can go oh so wrong, and my general state of address:
2 weeks ago i drove my Zr1 to Marc Haibeck, in Chicago, I wanted to get 4:10 viper gears..Keyless Entry, re-locate air temp sensor, one of Marc's chips..(yes, they are worth it) and for him to just fix any small problems, that he came across, simply said, I trust the man. Yesterday, I flew up, my arms are still tired, and drove her home. And now am wondering WHY i didn't install 4:10 viper gears before. I am more than happy. After breaking the new gears in by varing my speed and driving. I am one happy camper. Night and Day. Feels like i have added at least 50 hp. Marc found 3 vacuum leaks -fixed- I had a problem of some sort in the transmission, wrong fluids..-fixed- plus the slave cylinder was leaking badly, replaced, along with a new clutch. i had him install his air duct support hoops and fasten the air box, which allowed me to keep the stock accordian.fixed Keyless entry works great...open the hatch and doors with a push of a button, and it makes a little honk and lights flash..nice. replaced one bad oxygen sensor and he found both cables melted and replaced..fixed...headlight motors...fixed. removed the air pump..10 lbs. gone...re-aligned my exhaust, it seems the shop that installed had the 2 pipes from the cats to the muffler's were upside down and on the wrong side...i was gonna remove the cats and sell them to a friend..but now need them to make the length of the pipes look right. he sealed the left header stud...& re attached my shifter boot that had come loose. damn...I had asked Marc, if he ran across any things to fix em "Like It was His car" and he did...kudo's to Marc, great work, thanks Bro. the chip made my car idle..really smooth, Marc said as any he's worked on might be the because mine is an Early production car, #74, built in august of 89. No more backfires, no high idle..now a real pleasure to drive... If you ever engage the security system..and it honks and flashes for like 3 minutes in the parking lot of a Wal-Mart .a keyless fob will not stop it from honking...you must put the key in the door.. I'm really looking forward to Bowling Green, I may not be the fastest. but after my drive yetereday...who gives a fat rats...azz. |
04-25-2007 | #2 |
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Congratulations. Must be great to know everything is 100% with your drive!
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
04-25-2007 | #3 |
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Keith - was he working on the white one next to you????
__________________
Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19 |
04-25-2007 | #4 | |
Join Date: Mar 2006
Location: Innsbrook, Missouri
Posts: 1,727
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Quote:
those 49th street rocker panels... and the blue tinted roof panel.. you had, on you're car... i told Marc, he probably would like to brag he has the only convertible Zr1 in Minnesota..and those damn rocker panels..well i thought with the clearance problems...and all you wouldn't miss em. It was a sight to behold...3 white zr1's in one shop, at the same time. your's almost complete..another from missouri, almost complete..and one from New York, in for just an oil change. |
|
04-25-2007 | #5 |
Join Date: Feb 2007
Location: saint joseph,mo.
Posts: 279
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
i called mark yesterday to order the chip and he told me someone just left his shop from missouri (some crazy guy)...... now i know! i also asked about the gears and he told me they were not viper gears (because of the cost) but they are basically the same thing and just as good. sounds like your pleased with the gears and it sounds like mr. haibeck can finally put in that swimming pool cant wait to check it all out at B.G.
|
04-25-2007 | #6 |
Join Date: Aug 2006
Location: Columbia, Missouri
Posts: 116
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
What is the general turn around on his work there, is it possible to drive up and stay with the car or are we talking 7-10 days of work? Depending on what you have done ofcourse.
|
04-25-2007 | #7 | |
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Quote:
Best thing to do is call Marc and schedule an appointment.
__________________
Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19 |
|
04-25-2007 | #8 |
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Marco treat's all the car's with care......like if they were his own. When they get back from his place. The car's are in super shape.
Now about that oil change
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
04-25-2007 | #9 | |
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Quote:
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
04-25-2007 | #10 | |
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
|
Re: Haibeck, tuned, it's back, Ready for Bowling Green
Quote:
__________________
Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19 |
|
Thread Tools | |
Display Modes | |
|
|