|
|
|
11-17-2019
|
#1 |
|
Join Date: Nov 2016
Location: Gilroy, CA
Posts: 22
|
Crankshaft, 405 or 427 cu in
Does anyone know if anyone makes the above crankshafts and the rods? Thanks.
|
|
|
|
11-17-2019
|
#2 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Crankshaft, 405 or 427 cu in
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
11-17-2019
|
#3 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Crankshaft, 405 or 427 cu in
You can get a 4” stroke billet crankshaft from either Muldex or Bryant.
https://moldexcrankshaft.com https://bryantracing.com You use small block Chevy rods available from Oliver, Crower, Manley and others. For my 427 I used a 4” stroke Bryant crank, 6” SBC Crower Maxilite 6” rods, and 4.125” pistons from Diamond. Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
