|
|
|
02-19-2019
|
#1 |
 
Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 435
|
injection housing leak
After a hard drive i noticed some oil on the right side of inj housing. It looks like there is a leak from the gasket. Time to pull housing and replace the
gaskets. Should i replace the o rings on my injectors while i'am in there. Injectors are from FIC installed some time ago. I ordered new housing gaskets and plenum gaskets, but forgot to order o rings. Do i replace only the primary or do all of them. Thanks John |
|
|
|
02-19-2019
|
#2 | |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: injection housing leak
Quote:
FIC injectors come with new, Viton o-ring seals, except for the primary injector lower o-ring seals(8), Jerrys Gaskets PN 10067600-V. If you are not sure the o-rings you have presently are Viton, I recommend replacement. The rest of the o-ring seals are OK for re-use provided they are not damaged. Lightly lube all of the o-rings with motor oil before re-installing. Do not use silicone grease.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
02-19-2019
|
#3 | |
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: injection housing leak
Quote:
I’m curious why you recommend not using silicone grease? H 
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
|
02-19-2019
|
#4 | |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: injection housing leak
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 02-20-2019 at 07:08 PM. Reason: Correcting an error. |
|
|
|
|
|
02-20-2019
|
#5 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,709
|
Re: injection housing leak
Quote:
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
|
02-20-2019
|
#6 | |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: injection housing leak
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
02-23-2019
|
#7 |
|
Join Date: Aug 2014
Location: Montgomery TX
Posts: 263
|
Re: injection housing leak
Replaced mine, 5 years overdue, tighten our replace the evac cover bolts/gasket, it will be loose.
Get Jerry's core plugs and deep-6 the secondaries!!! Sent from my SM-G960U using ZR-1 Net Registry mobile app
__________________
1991 White ZRJuan #1616 Mileage: 56K Sept-14 -- 113k May-18!!! God Damn I Love This Car! |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
