ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 12-13-2018   #1
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 384
Default Slight knocking when cold

It's been fairly cold up here lately, 20-30 degrees.
My 92 has a knock for a while at startup until it gets up to normal water temp and normal oil temp. More pronounced while under load.
Oil pressure is normal and not fluctuating, about 70 psi.
Sounds like only one cylinder, not like the cold piston slap in my 5.3 Suburban.
Once everything is warmed up, the knock goes away. Gets quieter as the temps come up.
Car has 18,900 miles on it.
So, is this normal, or should I be checking rod bearings?
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 12-13-2018   #2
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Slight knocking when cold

There is a knock or noise of chain slap at start, in cold weather idling I have heard piston slap. Can ou get a video with the noise you are hearing?
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 12-13-2018   #3
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 384
Default Re: Slight knocking when cold

Quote:
Originally Posted by -=Jeff=- View Post
There is a knock or noise of chain slap at start, in cold weather idling I have heard piston slap. Can ou get a video with the noise you are hearing?


I'll try to get a sound bite this weekend, but with just a cell phone for video, I'm not sure it will be too helpful.....


I have no idea what LT5 chain slap sounds like.
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 12-13-2018   #4
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Slight knocking when cold

You only should hear it for about a minute or less on a cold start. Knock could be piston slap or the dual mass flywheel too
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 12-13-2018   #5
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 384
Default Re: Slight knocking when cold

This noise lasts a lot longer than a minute or two. More like 5 to 10 minutes.


I'll be pulling the pan either this weekend or next to replace the leaking gasket. I'll see if anything wiggles excessively while I'm in there....
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Old 12-13-2018   #6
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Slight knocking when cold

It may very well be the dual mass flywheel if the engine is running rougher at that temperature. Those temperatures can affect the coils, wires and injectors if they are marginal to begin with. This results in the engine running rough and imbalanced which in turn causes the dual mass flywheel to knock. That’s where I would look first. Bearing problems on LT5’s are very rare especially with those low miles. These engines are known to exhibit piston slap when cold however that should go away within a minute or two depending on the temperature. No reason to be too concerned at this point.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 12-13-2018   #7
gtcollins@maxnet.co.nz
 
gtcollins@maxnet.co.nz's Avatar
 
Join Date: Mar 2015
Location: New Zealand
Posts: 385
Default Re: Slight knocking when cold

You should try tightening the bolts on the oil pan a friend did and stop the oil leak on his Z

Sent from my SM-G960F using ZR-1 Net Registry mobile app
gtcollins@maxnet.co.nz is offline   Reply With Quote
Old 12-13-2018   #8
Subfixer
 
Subfixer's Avatar
 
Join Date: Sep 2018
Location: Groton, CT
Posts: 384
Default Re: Slight knocking when cold

Quote:
Originally Posted by gtcollins@maxnet.co.nz View Post
You should try tightening the bolts on the oil pan a friend did and stop the oil leak on his Z

Sent from my SM-G960F using ZR-1 Net Registry mobile app


Bolts were tightened once already, still leaks. Also going to check the Oil Pressure Regulating Valve Cover Plate.
__________________
1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers
2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black
2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige
Subfixer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020