|
|
|
10-19-2018
|
#1 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
ZR-1 Parts:Name Your Part & Price
I'm completely taking apart a 1990 ZR-1 the frame will be going to the junk yard it's a shame darn frame is perfectly straight but i need it gone and the parts gone.
Let me know what you need from bumper to bumper. Fenders wells skid bar,control arms (full poly suspension),ABS unit, etc,. Name your price as long as it's over shipping cost. Basicly if shipping is $10, pay $11 for the part total of $21 and it's yours. If you decide to pick up we will come to a price agreement. Paypal or check. Thanks Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage Last edited by Pete; 10-19-2018 at 07:41 PM. |
|
|
|
10-20-2018
|
#2 |
|
Join Date: Oct 2018
Location: Houston Texas
Posts: 40
|
Re: ZR-1 Parts:Name Your Part & Price
I have a black 1990 ZR1 with ~ 53k miles that could use a number of parts.
-wiper motor and control module -shock actuators and ride control computer? -AC control unit? -Misc front / undercarriage parts. The prior owner had an 'encounter' with a curb and went right up over it. There's a lot of parts that got scrapped up. I'll have to send pictures of what I need and see what you have I guess? Shipping would be to 77084. Sorry to hear you're having to part it! Care to share the story? |
|
|
|
|
10-20-2018
|
#3 |
 
Join Date: Jun 2014
Location: Cincinnati, OH
Posts: 10
|
Re: ZR-1 Parts:Name Your Part & Price
I need a good used Ecm. $650
__________________
91 Corvette ZR-1 #1346 |
|
|
|
|
10-20-2018
|
#4 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: ZR-1 Parts:Name Your Part & Price
I know somebody looking for one also willing to pay $1000.
Pete Quote:
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
10-20-2018
|
#5 | |
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,752
|
Re: ZR-1 Parts:Name Your Part & Price
Quote:
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
|
10-20-2018
|
#6 | |
|
Join Date: Jun 2014
Location: Cincinnati, OH
Posts: 10
|
Re: ZR-1 Parts:Name Your Part & Price
Quote:
__________________
91 Corvette ZR-1 #1346 |
|
|
|
|
|
10-30-2018
|
#7 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,078
|
Re: ZR-1 Parts:Name Your Part & Price
What shape is the carpet in on the right side of the trans tunnel? I need the antenna relay plug under the rear center trim,must be in very nice shape and the small capacitor at the brake light wiring harness at the brake light connector. This capacitor is should be covered in wide black tape.
|
|
|
|
|
07-30-2019
|
#8 |
Join Date: Jul 2019
Location: Holly Springs, NC
Posts: 91
|
Re: ZR-1 Parts:Name Your Part & Price
Do you have 1990 ZR1 Fuel sending unit that has 2 fuel pumps?
|
|
|
|
|
10-20-2018
|
#9 | |
Join Date: May 2004
Posts: 451
|
Re: ZR-1 Parts:Name Your Part & Price
Quote:
|
|
|
|
|
|
10-20-2018
|
#10 | |
|
Join Date: Jun 2014
Location: Cincinnati, OH
Posts: 10
|
Re: ZR-1 Parts:Name Your Part & Price
Quote:
__________________
91 Corvette ZR-1 #1346 |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
