Need TCS Nuts - ZR-1 Net Registry Forums

Route 66 · 09-20-2018

I would like to buy a set of OEM TC shield Nuts if any one has a set they do not want or need. Mine were lost at the GM dealership a long time ago. If you have a set of OEM would you let me know...Thanks..

Paul Workman · 09-20-2018

Try these sources in order:

ACE HARDWARE, Menards, Home Depot
Fastenal (but you'll need the metric thread size and pitch when placing the order)
McMaster-Carr (same deal - need the metric thread size/pitch)

And, while your at it, you can get some stainless hex cap screws to replace better match the new paint on the plenum, etc. (either #2 or 3 will have them for sure. #1 too, except I'm not as sure about that source for those particular cap screws (stainless to boot)).

A26B · 09-20-2018

Or, you can save yourself the time & expense & just get them here, for delivery to your door! They are identical to OE.

http://www.jerrysgaskets.com/nut-thr...ew-90-95-6-5a/

efnfast · 09-20-2018

Quote:

Originally Posted by A26B

Or, you can save yourself the time & expense & just get them here, for delivery to your door! They are identical to OE.

http://www.jerrysgaskets.com/nut-thr...ew-90-95-6-5a/

Well, that sounds like a no brainer.

Demps · 09-20-2018

Quote:

Originally Posted by efnfast

Well, that sounds like a no brainer.

Yep...and a few gaskets for spares in the shipment.
Ted

09-20-2018	#3
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: Need TCS Nuts Or, you can save yourself the time & expense & just get them here, for delivery to your door! They are identical to OE. http://www.jerrysgaskets.com/nut-thr...ew-90-95-6-5a/ __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-20-2018	#2
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Need TCS Nuts Try these sources in order: ACE HARDWARE, Menards, Home Depot Fastenal (but you'll need the metric thread size and pitch when placing the order) McMaster-Carr (same deal - need the metric thread size/pitch) And, while your at it, you can get some stainless hex cap screws to replace better match the new paint on the plenum, etc. (either #2 or 3 will have them for sure. #1 too, except I'm not as sure about that source for those particular cap screws (stainless to boot)). __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry