Sway Bar Sizes - ZR-1 Net Registry Forums

32valvZ · 06-20-2018

Using my ghetto plastic veneer caliper, I came up with what I think is a 24mm rear and a 26mm front for my sway bar sizes. Does that seem correct? Did a 90 ZR-1 come with any other sizes for the sway bars?
Thanks, John

Hib Halverson · 06-30-2018

Quote:

Originally Posted by 32valvZ

Using my ghetto plastic veneer caliper, I came up with what I think is a 24mm rear and a 26mm front for my sway bar sizes. Does that seem correct?

Those are the stabilizer bar diameters for MY90.

Quote:

Did a 90 ZR-1 come with any other sizes for the sway bars?
Thanks, John

Yes. 91-95 used a 26-mm rear bar.

32valvZ · 06-30-2018

Quote:

Originally Posted by Hib Halverson

Those are the stabilizer bar diameters for MY90.

Yes. 91-95 used a 26-mm rear bar.

Thank you.

06-20-2018	#1
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Sway Bar Sizes Using my ghetto plastic veneer caliper, I came up with what I think is a 24mm rear and a 26mm front for my sway bar sizes. Does that seem correct? Did a 90 ZR-1 come with any other sizes for the sway bars? Thanks, John __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode