|
|
|
10-26-2017
|
#1 |
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Fidanza and a Sprung Hub Disc
Like many here, I shortly plan to install a Fidanza FW and a Sprung Hub Disc of an LT1 Camaro. I chose a McCleod Disc because of my positive history with them. I know that the raised hub side of the disc fits inside the cavity in the FW. I noticed that the flat side of the disc is marked “ Flywheel side”. Obviously it won’t fit that way. Can’t imagine the direction of rotation would affect this type of disc. Have any of you had to flip the disc over to install it? Attached are couple pix of the disc.
H   
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
10-26-2017
|
#2 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Fidanza and a Sprung Hub Disc
As I recall (now), I have a ZR-1 Veleo pressure plate; not the LT1/4 PP. I'm using a Center Force, sprung hub disc from Summit #381039, if anyone is interested.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
10-26-2017
|
#3 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Fidanza and a Sprung Hub Disc
Quote:
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
|
10-26-2017
|
#4 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Fidanza and a Sprung Hub Disc
Quote:
A call to McLeod could answer definitively. If there is a purpose and it is labeled incorrectly, your call would give them an opportunity to rectify the issue.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
10-26-2017
|
#5 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Fidanza and a Sprung Hub Disc
Quote:
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
|
10-26-2017
|
#6 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Fidanza and a Sprung Hub Disc
Hans,
I seem to recall that the "flat side" was toward the flywheel. I've got the sprung hub disk out of the setup. I'll look at it to see if I can find any clues to the orientation. Here are the three laid out after removal.. Sent from my XT1585 using ZR-1 Net Registry mobile app |
|
|
|
|
10-26-2017
|
#7 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Fidanza and a Sprung Hub Disc
Sent from my XT1585 using ZR-1 Net Registry mobile app
Last edited by jss06c6; 10-26-2017 at 11:13 PM. |
|
|
|
|
10-26-2017
|
#8 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Fidanza and a Sprung Hub Disc
|
|
|
|
|
10-26-2017
|
#9 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Fidanza and a Sprung Hub Disc
|
|
|
|
|
10-27-2017
|
#10 |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Fidanza and a Sprung Hub Disc
With the Valeo (ZR-1 or STD) PP the raised hub side of the disc does not fit facing the PP. Hence the flat side cannot face the FW. It does fit nicely flipped the other way.
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
