Some Mods before the winter. - ZR-1 Net Registry Forums

G8nightman · 10-21-2016

So I got lucky and found a NOS set of injector housings for a great price $360 on ebay had them sent straight to Lee (LGAFF) since I Bought a spare Plenum and Airhorn from him and wanted to get everything ported. Once Lee finished the porting I got everything powder coated red. My AC compressor also blew on my way to Carlisle so order a new unit straight from Denso along with a dyer and AC lines.

I was ready to do the Plenum pull surprise surprise dirty and grimy also found a mouse nest in the valley and of course the drain was clogged. So removed the Starter Alternator and AC comp Coil Packs and this is what we where left with.

Time to start cleaning. Results...

G8nightman · 10-21-2016

After everything was clean started to reinstall everything

I didn't want to mess with the TB to much I freshened it up a bit

G8nightman · 10-21-2016

Time to close it up

Also sourced a Set of Front GS Calipers New Rotors and Pads all around

Cleaned and painted the rear Calipers

G8nightman · 10-21-2016

And the final product :-)

Hope you enjoy

XfireZ51 · 10-21-2016

U should try resizing these pics for easier viewing and not to chew up data.

G8nightman · 10-21-2016

Quote:

Originally Posted by XfireZ51

U should try resizing these pics for easier viewing and not to chew up data.

Yes sorry doing that now.

GOLDCYLON · 10-21-2016

where did you source those GS calipers ?

The PC process wont screw up the TB I've had it done.

Roadster · 10-21-2016

George, great job and a good future reference......let us know what the performance increase feels like!!!

G8nightman · 10-21-2016

Quote:

Originally Posted by GOLDCYLON

where did you source those GS calipers ?

The PC process wont screw up the TB I've had it done.

I was searching for a bit I found some used and new ones from Vendors but they only had front lefts. So I post a WTB thread in the C$ section in the corvette forums and got a bite for a NOS left and right at a great price :-) it was a fellow ZR1 brother that is selling his car and extra parts.

G8nightman · 10-21-2016

Thanks Tom It pulls harder I am also running Mark H. Chip so its tuned for the porting and headers.

10-21-2016	#1
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Some Mods before the winter. So I got lucky and found a NOS set of injector housings for a great price $360 on ebay had them sent straight to Lee (LGAFF) since I Bought a spare Plenum and Airhorn from him and wanted to get everything ported. Once Lee finished the porting I got everything powder coated red. My AC compressor also blew on my way to Carlisle so order a new unit straight from Denso along with a dyer and AC lines. I was ready to do the Plenum pull surprise surprise dirty and grimy also found a mouse nest in the valley and of course the drain was clogged. So removed the Starter Alternator and AC comp Coil Packs and this is what we where left with. Time to start cleaning. Results... __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

10-21-2016	#2
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: Some Mods before the winter. After everything was clean started to reinstall everything I didn't want to mess with the TB to much I freshened it up a bit __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

10-21-2016	#3
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: Some Mods before the winter. Time to close it up Also sourced a Set of Front GS Calipers New Rotors and Pads all around Cleaned and painted the rear Calipers __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

10-21-2016	#4
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: Some Mods before the winter. And the final product :-) Hope you enjoy __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

10-21-2016	#5
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: Some Mods before the winter. U should try resizing these pics for easier viewing and not to chew up data. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

10-21-2016	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Some Mods before the winter. where did you source those GS calipers ? The PC process wont screw up the TB I've had it done. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-21-2016	#8
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Re: Some Mods before the winter. George, great job and a good future reference......let us know what the performance increase feels like!!! __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member

10-21-2016	#10
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: Some Mods before the winter. Thanks Tom It pulls harder I am also running Mark H. Chip so its tuned for the porting and headers. __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode