Exhaust manifold - ZR-1 Net Registry Forums

Belsy · 01-18-2007

Help!!! Just crawled out from looking at exhaust manifold removal on my 90 to fix cats or install headers and thought there must be some secret to doing this in less than a week? Any suggestions or directions would be greatly appreciated!!
Probably will try headers once I remove everything, any used systems out there? Does motor have to be tilted to gain access to bolts and are there any articles that help ??

Thanks for any help

tomtom72 · 01-19-2007

Gene, I do believe over at the netregistry site in the how to section under the maintanence tab there is a write up about a header install.

Tom

jonszr1 · 01-19-2007

If you can afford it buy the headers and put them on now. Taking of the heatshields is a PIA once let alone twice. Give new meaning to sushi fingers -paper cuts.

1/4 1n drice swivels and combo of extentions for the shields. same but 3/8 for the exhaust. but thats just my feeling after doing it twice.

1990 quasar blue · 01-19-2007

http://www.pnwzr1.net/PNWZR1.htm
Scroll down to header install. Nick did a great job on this.

01-18-2007	#1
Belsy Join Date: Nov 2006 Location: DeBary , Fl. Posts: 119	Exhaust manifold Help!!! Just crawled out from looking at exhaust manifold removal on my 90 to fix cats or install headers and thought there must be some secret to doing this in less than a week? Any suggestions or directions would be greatly appreciated!! Probably will try headers once I remove everything, any used systems out there? Does motor have to be tilted to gain access to bolts and are there any articles that help ?? Thanks for any help

01-19-2007	#2
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Exhaust manifold Gene, I do believe over at the netregistry site in the how to section under the maintanence tab there is a write up about a header install. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

01-19-2007	#3
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Exhaust manifold If you can afford it buy the headers and put them on now. Taking of the heatshields is a PIA once let alone twice. Give new meaning to sushi fingers -paper cuts. 1/4 1n drice swivels and combo of extentions for the shields. same but 3/8 for the exhaust. but thats just my feeling after doing it twice.

01-19-2007	#4
1990 quasar blue Join Date: Feb 2004 Location: Ma Posts: 403	Re: Exhaust manifold http://www.pnwzr1.net/PNWZR1.htm Scroll down to header install. Nick did a great job on this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode