Stuck!! No crank ! LF some input and help !

[5ABI VT]

**UPDATE SOLVED !!**


It was the clutch switch ! Snipped the wires and connected them together and she cranks beautifully. Thanks again to everyone who put up with me typing my thoughts over the last week and that chimed in. Very much appreciated this forum is awesome



** Original post **

I guess it was only a matter of time after reading about no crank threads here and there on the forum ! First time it's happened to me.. Finishing moving.. Last thing was to get my ZR-1 home. Stopped for gas and now she won't fire up.


Car is a 1994 *

Security doesn't blink when the key is in so thinking not vats. But looks like the bypass is next on the list for one.

Clutch pedal.. I can't seem to see any photos on where to look.. Does the panel need to be removed to access the switch ? I have no tools on me but i do have someone to help push ! Will try that shortly.

Any input is appreciated !



**UPDATE** 08/15/16 11am

Again in a nutshell. Cranked and fired every single time over the years until this happened. My experience tells me if it was the starter it may crank sometimes .. I've personally never had one die completely but there's always a first time. I did just do the clutch switch bypass. 5 mins and done but still no start.

https://youtu.be/d_rI6IdEKsg




**UPDATE 08/15/16 2pm**

Thanks to all your guys help so far at least I am now able to fire the car up until I get it sorted out !

Harness under the ECM.


Purple wire



I added a 8awg quality wire I had laying as spare. Touching this to the battery positive terminal cranked the motor instantly.
Added a rubber cap and taped it and the wire later for extra protection. Easily hidden out of sight.


Now to figure out why the starter isn't getting power when I turn the key.. Hmm..

[We Gone]

Any chance you can give it a push and slip it in 2nd gear to get it going and home?

[5ABI VT]

Originally Posted by We Gone

Any chance you can give it a push and slip it in 2nd gear to get it going and home?

Managed to push start it I'm on the way ! Couldn't be more relieved just need to get it there and I can tear into it this week. Will search the threads for info sorry for asking yet again !!

[5ABI VT]

If it's push starting is clutch switch the likely culprit ? I did just pump the clutch pedal 10000x just a month ago

[secondchance]

Try starting once the car cools down. I had the same happen to me. As the starter age heat soak, at times, disables it. Rebuild or a new starter may be the solution.

[5ABI VT]

Originally Posted by secondchance

Try starting once the car cools down. I had the same happen to me. As the starter age heat soak, at times, disables it. Rebuild or a new starter may be the solution.

It's been a few hours while we finished moving .. No click at all still I have my manuals somewhere but they're buried under various boxes. Hoping the clutch switch is accessible after dropping the kick panel and I'll cut and tie them together or jumper the switch. Hopefully that's the issue. If not tomorrow I'll pull the plenum and pull the starter out and check it out.

Appreciate the input !

[RussMcB]

If you need a semi-quick fix to prevent being stranded due to no-start see this thread:

http://zr1.net/forum/showthread.php?t=24767

That will allow you to send 12v directly to the starter, bypassing everything that might be causing the problem.

I did the above and lived with it for a brief time until I could do the VATS bypass and relay mod, which fixed my issue.

[5ABI VT]

Originally Posted by RussMcB

If you need a semi-quick fix to prevent being stranded due to no-start see this thread:

http://zr1.net/forum/showthread.php?t=24767

That will allow you to send 12v directly to the starter, bypassing everything that might be causing the problem.

I did the above and lived with it for a brief time until I could do the VATS bypass and relay mod, which fixed my issue.

Thanks very much that is great if I'm understanding correctly this adds a longer sure with a sort of 'T' fitting in between. If and when the starter isn't getting power I can connect a second wire to the 'T' and the other end straight to the battery ?

[RussMcB]

Originally Posted by 5ABI VT

Thanks very much that is great if I'm understanding correctly this adds a longer sure with a sort of 'T' fitting in between. If and when the starter isn't getting power I can connect a second wire to the 'T' and the other end straight to the battery ?

Basically what you are doing is finding the wire that goes to the starter (the big purple wire), and giving it 12v straight from the battery. (make sure car is out of gear!)

Another benefit to this quick, temporary fix is, if the car starts with this method you confirm your starter motor isn't the problem.

[5ABI VT]

Originally Posted by RussMcB

Basically what you are doing is finding the wire that goes to the starter (the big purple wire), and giving it 12v straight from the battery. (make sure car is out of gear!)

Another benefit to this quick, temporary fix is, if the car starts with this method you confirm your starter motor isn't the problem.

Next on the list and will try it shortly. I will need to have someone in the car turning the key I assume to get it to fire? Regardless like you said if the starter turns then I know it's not the issue ! Will report back shortly thanks !