Single Mass Flywheels

[Karl]

Is the ram flywheel plug and play or does it require a new clutch and other components to make it work?

I see Jerry has one that is "plug and play" with the original components, but is about 5 lbs. heavier.

The cluch in my car is relatively new and am not looking to replace it.

Thanks.

[-=Jeff=-]

uses different pieces to my knowledge..

What clutch set-up do you have?

Also I thought you were selling

[Karl]

Originally Posted by -=Jeff=-

uses different pieces to my knowledge..

What clutch set-up do you have?

Also I thought you were selling

Factory replacement clutch from what I can see on the receipt from the prior owner.

I was going to sell but I kept getting low offers just because of a busted transmission.

It just so happened that a forum member was passing through and had a black tag zf-6 out of a '90 for a good price so I picked it up.

So I spent some more money on the car and will be enjoying the car some more!

[Paul Workman]

Originally Posted by Karl

So I spent some more money on the car and will be enjoying the car some more!

Very glad to hear that Karl!

[efnfast]

See my thread
http://www.zr1.net/forum/showthread.php?t=25865
Didn't work out as expected.
My clutch is still slipping (or it least it was in the fall). Haven't decided on a coarse or action yet.

[BigJohn]

Transmission rattles!

[Karl]

I am aware of the noise and so forth. Jerry's option seems to be the best from what I can see if it is indeed "plug and play" so to say.

Just doing some double checking.

[efnfast]

If you read my thread, mine was definately not plug and play.
And I have a lot of rattle, I don't blame that on Ram.

[efnfast]

Karl, read my thread. I have a black tag 90.

[Karl]

Originally Posted by efnfast

Karl, read my thread. I have a black tag 90.

I read it a long time ago.

Just double checking.

Going with one of Jerry's units.

Thanks.