|
|
|
12-10-2006
|
#1 |
|
Guest
Posts: n/a
|
20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
20 HP from what i call it CHiPLess!
 from ebay. HOT!!tell us your opinion about it  !thanks. http://cgi.ebay.com/ebaymotors/20HP-...spagenameZWDVW |
|
|
12-11-2006
|
#2 |
 
Join Date: Oct 2004
Location: Woods Cross, UT
Posts: 389
|
Re: 20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
This is simply an alternative to relocating your IAT sensor...as to the 20HP horsepower gain I say BS! It does HELP when the weather is warm, but the difference will not be 20HP. Relocating your IAT sensor is a more intelligent way to do this...
__________________
Uly Past OWNER 90 ZR-1 #0120 Red/Saddle UT Plate: EZR1DER |
|
|
|
12-11-2006
|
#3 |
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: 20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
Relocating the MAT is much better than the ole resistor. Using the resistor is a good head gasket removal tool
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
|
|
|
|
12-11-2006
|
#4 | |
|
Join Date: Oct 2004
Location: Woods Cross, UT
Posts: 389
|
Re: 20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
Quote:
For your sanity....the MAT sensor and the IAT sensor mentioned above are the same thing. Marc Haibeck (one of our premier LT5 tuners) definitely believes in relocating them... http://www.zr1specialist.com/HAT%20W...20Upgrades.pdf Uly
__________________
Uly Past OWNER 90 ZR-1 #0120 Red/Saddle UT Plate: EZR1DER |
|
|
|
|
|
12-11-2006
|
#5 |
|
Guest
Posts: n/a
|
Re: 20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
so this picture here i show is MAT or IAT?? what is IAT sensor ?
|
|
|
|
12-11-2006
|
#6 |
|
Guest
Posts: n/a
|
Re: 20 HP from what i call it CHiPLess for 93-95 ZR!!from ebay. HOT!!
hmm so IAT sensor is > intake air temperature! and MAT = manifold air temp. ? so is it same, yaa?
 anyway i have this relocate MAT sensor, but i have the 91 wire, so plzz can someone here tell me the color of 2 wires where is goes? each to be connected in right place, since i have the 91 relocate kit, i want use it on lt5! thanks. my ZR1 and stuff is not right now with me, i live far from my Z now! Last edited by HADI-ZR1; 12-11-2006 at 09:17 PM. |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
