|
08-12-2014 | #1 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
LT5 hesitation...
... which Marc says ALL LT5's have...
I still have a small amount of water in my tank - hardly noticeable, and it will all be out after a few more drives. But something came to me here this morning, related to the residual water. When backing uphill, up my driveway, she struggles. Warmed up, it's not noticeable even. But backing uphill cold, RPM's are probably right about 1.6% throttle. Which is where DataMaster showed the hesitation, and LOPE - from 1.6 - 2.4% TO. LIKE a vacuum leak, if throttle linkage is HELD at that throttle position... Like the pulsewidth / gas isn't sufficiently calibrated @ that throttle position... Now I have a little water still mixed in. Even LESS gas, exacerbating the problem. The water isn't the issue, because it will shortly be spent. The issue is the pulsewidth calibration at that TO %. Any thoughts here on increasing the pulsewidth at the 1.6 - 2.4% TO position???
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
08-12-2014 | #2 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: LT5 hesitation...
Good question huh guys...
Anyway here, the water is gone. Took a ride, backed up the driveway, smooth as silk again - except for that light 'bump' at 1.6% - same as usual, that Marc says every one of 'em has........................... With a stick, you're well over 2.4% TO, when you let in the clutch. This automatic has no choice. A stick won't see it unless you're in the garage.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 08-12-2014 at 11:36 PM. Reason: publik skool; kant spel |
08-13-2014 | #3 |
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: LT5 hesitation...
What torque converter are you running?
__________________
peace Paul ZR-1 Net Registry Member #1494 |
08-13-2014 | #4 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: LT5 hesitation...
It's a Precision Industries piece there Hog - pretty stout piece (for $9C, it oughtta' be).
2300 stall...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
08-13-2014 | #5 |
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: LT5 hesitation...
Very nice, the Vigilante is a high quality piece.
Since this occurs when the car is cold, sonds like you'd need to do some Open Loop tuning. Does the A/C compressor loading affect this issue at all. Better with A/C On vs. Off? Whats your timing advance doing at the 1.6-2.4 TP opening?
__________________
peace Paul ZR-1 Net Registry Member #1494 |
08-13-2014 | #6 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: LT5 hesitation...
Does it Closed Loop too there Hog.
Only the left-over water in the gas tank exacerbated the glitch, because fuel calibration I think is not correct for that TO % range. DM log (CL) showed SA @ about 16' as it hit 1.6 TO, and then when it exceeded 1.6%, up to 2.4% TO, it bumped up to 25', then up and down, until TO % exceeded 2.4%. DM video is here, lope starts at 2:53, as TO hits 1.6% Marc looked at it when we talked about it, AT LENGTH, and he said they'll all do it. I can't argue with him on it - he knows better than I do. I'm not satisfied tho'...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
08-13-2014 | #7 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: LT5 hesitation...
The C/L Threshold for Idle is 1.95% TPS, right in between your 1.6-2.4%. So the ECM is straddling idle and open throttle operation. That means its also jumping between C/L idle spark advance and open throttle tables. In addition, it sounds like a bit of a lean surge which the BLM look like at idle. A log or spreadsheet would be better to review.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
08-13-2014 | #8 | |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: LT5 hesitation...
Quote:
I haven't figured out how to plot / grid values in Windows; much less Linux; still reading there. Just needs a little more thought here, and my CPU stays pegged
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
|
08-14-2014 | #9 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: LT5 hesitation...
DM must have a way of creating a .txt file from the scan.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
08-14-2014 | #10 | |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: LT5 hesitation...
Quote:
ed.: Same behavior. Light pedal, accelerating down my street, and again, when the auto shifts, and throttle drops to just above idle. Ever so slight lope, until acceleration (over 2.4% TO).
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 08-14-2014 at 12:53 PM. |
|
Thread Tools | |
Display Modes | |
|
|