DRM coil over install. - ZR-1 Net Registry Forums

cvette98pacecar · 08-05-2014

I reserved the first ten post for step by step instructions.

cvette98pacecar · 08-05-2014

Reserved 2.

cvette98pacecar · 08-05-2014

Reserved 3.

cvette98pacecar · 08-05-2014

Reserved 4.

cvette98pacecar · 08-05-2014

Reserved 5.

cvette98pacecar · 08-05-2014

Reserved 6.

Jitse · 08-06-2014

I will start soon with my DRM coil-over, swaybars, and Banski rear suspension upgrade too. Looking forward to see your reports :-) and if there is interest I add some pictures here from the progress.

BennieC. · 09-27-2014

This is also in my wish list. Waiting for Randy @ DRM to get back with me.

Jitse · 10-07-2014

Last week, I started with the upgrade.
Everything is now dismantled and cleaned, I want to make the groove in shock absorber for the snap-ring too keep the sleeve in position. Did somebody know the wall thickness from the Bilstein shock?

I think to go 0.4 mm deep. Any recommendation ?

I like to change the bushings for the front End Control Arm, the energy suspension catalogue item #3.3142 looks correct for it. With a press it's not too big issue to change them.....

Later on some pictures from my progress.

08-05-2014	#1
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	DRM coil over install. I reserved the first ten post for step by step instructions. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car Last edited by cvette98pacecar; 08-05-2014 at 11:36 AM.

08-05-2014	#2
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 2. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#4
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 4. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#5
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 5. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#6
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 6. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-06-2014	#7
Jitse Join Date: Aug 2013 Location: Holland Posts: 80	Re: DRM coil over install. I will start soon with my DRM coil-over, swaybars, and Banski rear suspension upgrade too. Looking forward to see your reports :-) and if there is interest I add some pictures here from the progress.

09-27-2014	#8
BennieC. Join Date: Feb 2013 Location: Sacramento Posts: 21	Re: DRM coil over install. This is also in my wish list. Waiting for Randy @ DRM to get back with me.

10-07-2014	#9
Jitse Join Date: Aug 2013 Location: Holland Posts: 80	Re: DRM coil over install. Last week, I started with the upgrade. Everything is now dismantled and cleaned, I want to make the groove in shock absorber for the snap-ring too keep the sleeve in position. Did somebody know the wall thickness from the Bilstein shock? I think to go 0.4 mm deep. Any recommendation ? I like to change the bushings for the front End Control Arm, the energy suspension catalogue item #3.3142 looks correct for it. With a press it's not too big issue to change them..... Later on some pictures from my progress.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode