|
|
|
09-07-2013
|
#1 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Anyone up for running with the horses next Saturday morning?
If so sign up today. http://northernvirginiamustangclub.c...VMC-Drag-Day-2 New motor is broke in so got to see what it can do down the 1320. My privious best run with the stock motor was 12.08 @ 118 mph
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
09-07-2013
|
#2 |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
I going to have to miss this one fellas, have a last minute trip to FL. I've already paid, if someone wants to take my place, let me know.
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
09-14-2013
|
#3 | |
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,713
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Quote:
How did it go? Am in Jakarta now then heading to Bangkok, KL, Singapore and Manila then home. Sorry I am missing the fun.
__________________
Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa |
|
|
|
|
|
09-14-2013
|
#4 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Charlie,
Your a little early pal. It's 6 in the morning here an the sun is not even up. Give me a few more hours and I will post up how things went. Be good or good as you can and safe travels.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 09-14-2013 at 07:51 AM. |
|
|
|
|
09-14-2013
|
#5 |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Give those Mustangs hell today Phil!! Wish I could be there!! I want to see low 11's!!!
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
09-14-2013
|
#6 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Maiden run taking it easy she did an 11.61 at 124
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 09-17-2013 at 07:47 AM. Reason: Corrected speed |
|
|
|
|
09-14-2013
|
#7 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Well the billet spindles let my down on the 2nd run
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
09-14-2013
|
#8 | |
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Quote:
|
|
|
|
|
|
09-14-2013
|
#9 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
 Damn drivers side spindle twisted off right at the bearing hub.  Luckily Darrin and his neighbor John were there to help with swapping it out. Thanks a bunch guys. I came out at around 2000 and the spindle popped at about the 60 ft timing light. With the new motor and no secondaries the car comes out like a beast compared to the old motor with secondaries. Wished I could have got a few more runs in. There was a new ZL1 Camaro there with DRs on running just a little quicker than the one good pass I was able to get in so in spite of the bad spindle luck overall I'm very pleased with the with the performance of the car with the new motor. Now on to getting some bullet proof spindles.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 09-14-2013 at 07:02 PM. |
|
|
|
|
09-14-2013
|
#10 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Sept 14 NVMC Drag Day Test & Tune Session at Mason Dixon
Phil,
Your maiden run was pretty stout!!!! Glad to hear there were guys there to help out with the broken spindle Look forward to more runs  David |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
