Driver for datalog hardware...

[Schrade]

edit: It's now a different problem:

It's now a 'Hardware Not Found' issue (for TunerPro 5.0).

DataMaster - Z1 says, "ALDL is working, but no PCM detected."

I did download the '90, '91 LT5 version from DataMaster website.

Help?

[Franke]

Shrade,

I had to download a similar uart driver for my laptop as it didn't have a usb driver for my TTS datamaster as well. Go on the web and type in the search box ft232 uart usb driver. I beieve you will find one you can use.

[Schrade]

Originally Posted by Franke

Shrade,

I had to download a similar uart driver for my laptop as it didn't have a usb driver for my TTS datamaster as well. Go on the web and type in the search box ft232 uart usb driver. I beieve you will find one you can use.

Thanks there Franke...

It's now a 'Hardware Not Found' issue (for TunerPro 5.0).

DataMaster - Z1 says, "ALDL is working, but no PCM detected."

I did download the '90, '91 LT5 version from DataMaster website.

Help?

[Tyler Townsley]

Are you using a serial to usb converter? I had to use the software that came with the converter to get my FJO dual wideband setup to work. I am going to try Tunerpro tomorrow, will let you know.

Tyler

[Schrade]

Originally Posted by Tyler Townsley

Are you using a serial to usb converter? I had to use the software that came with the converter to get my FJO dual wideband setup to work. I am going to try Tunerpro tomorrow, will let you know.

Tyler

Thanks Tyler - yes, using a serial to USB connector. Seems to be a common problem, psoted about in 2003. Still not fixed by programmers...

"Disable CCM Handshake" ( a recognition problem ), did not fix the problem.

They have to do better than this...............

[Schrade]

Changed COM port to port 4; CCM detected.

Still no readings displayed...

[Franke]

Schrade,

What version of datamaster are you using and what year is your car?

[Schrade]

Originally Posted by Franke

Schrade,

What version of datamaster are you using and what year is your car?

90-92 Y-Body 5.7L (ZR1) DM35xZ1 - Complete Installation

Little bit of progress beyond original problem here, Franke...

[Franke]

Try recording a datamaster file and playback of the datamaster file instead of diacom

[Schrade]

Thanks for helpin' here Franke - appreciate it much! Sure wouldn't mind if a few others chimed in too...

I got some 'data', but it means nothing to me just yet here.

Started a recording with the engine off, then started the engine, and noted parameters doing 'reads', then played with the throttle, noted additional reads, and shutdown.

Saved files don't read in 'progression'. Have to play with it tomorrow some more here...