|
|
|
06-10-2013
|
#1 |
 Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
Should I throw these trim parts away?
My rear interior trim was cracked, so I got the 3 piece kit from Corvette America. What should I do with the original parts? The center tray was cracked between the screws and a couple screws went all the way through. (assuming somebody overtightened BIG time) The right side piece has a small angled piece missing at the top front, and the piece that screws in the front behind the courtesy light is broken. The left piece is good except for the piece that screws behind the courtesy light is also broken.
SO - since I'm a pack rat by nature and I need to stop it - do I trash this stuff or keep it? Not used to "rare car parts"....
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
|
|
|
06-11-2013
|
#2 |
|
Join Date: Jun 2012
Location: PA
Posts: 772
|
Re: Should I throw these trim parts away?
Unless you know a way to repair the broken pieces I would replace them with new or parts from a salvage yard and toss the broken pieces.
__________________
Joe 1990 Bright Red ZR-1 #2599 |
|
|
|
|
06-11-2013
|
#3 |
|
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
Re: Should I throw these trim parts away?
Already replaced them with new stuff. Just wasn't sure whether or not to throw out original parts even if damaged.... New to this "rare car" stuff
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
|
|
|
|
06-11-2013
|
#4 |
|
Join Date: Jun 2012
Location: PA
Posts: 772
|
Re: Should I throw these trim parts away?
I could see if you had a low mileage trailer queen, but someone correct if I'm wrong, the interior pieces of our cars are the same as all the base models. So if you want to keep it original as possible, I'd go with salvage yard parts or OEM, no one will know the difference but you.
__________________
Joe 1990 Bright Red ZR-1 #2599 |
|
|
|
|
06-12-2013
|
#5 |
|
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
Re: Should I throw these trim parts away?
Cool, thanks! To file 13 they shall go!
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
|
|
|
|
06-12-2013
|
#6 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Should I throw these trim parts away?
Quote:
Pitch em. Dont feel bad about it.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
06-12-2013
|
#7 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Should I throw these trim parts away?
I would take them for shipping if you are just throwing them out
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
06-12-2013
|
#8 |
 Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Re: Should I throw these trim parts away?
not worth much, but they can be fixed (plastic weld) and refinished.
might be fun to do some project work and do the CF wrap. seen some of that work that was impressive. looks like the real thing and it's way cheaper
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
|
|
|
|
06-13-2013
|
#9 | |
|
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
|
Re: Should I throw these trim parts away?
Quote:
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER] |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
