Dana 4.10 48084/48085 - ZR-1 Net Registry Forums

WVZR-1 · 06-08-2006

I've a set of the Dana 4.10 gears, 48084/48085 and it includes a "crush spacer" (NOT a sleeve) to be used on the front pinion bearing like the Mopars. What needs to be used for the proper setup in our D44 housings. There are a good many references to this gear set in the early "archives" but I'd like a bit of information to accomplish the install!! I posted this also on the "list serve" but it came back to me at least looking pretty "jibberish"!

Thanks, Dave

06-08-2006	#1
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Dana 4.10 48084/48085 I've a set of the Dana 4.10 gears, 48084/48085 and it includes a "crush spacer" (NOT a sleeve) to be used on the front pinion bearing like the Mopars. What needs to be used for the proper setup in our D44 housings. There are a good many references to this gear set in the early "archives" but I'd like a bit of information to accomplish the install!! I posted this also on the "list serve" but it came back to me at least looking pretty "jibberish"! Thanks, Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode