|
|
|
05-26-2012
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
Gurney Bubble Targa Top
Was thinking today, I have a cracked targa top in my basement I got for free....would it be hard to make it a Gurney Bubble top, I always have to sit in my car with my head cocked when wearing my helmet.....
Hey Brett, thoughts?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
05-26-2012
|
#2 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,899
|
Re: Gurney Bubble Targa Top
Easy, Lee. Just have to use a 97 up top for the bump(s).
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
05-26-2012
|
#3 |
 Join Date: Jan 2011
Location: Dubai, United Arab Emirates
Posts: 449
|
Re: Gurney Bubble Targa Top
Anyone have a photo of the Gurney Bubble Targa Top? News to me. Could use a couple more inches head or butt room. Butt is too big but head only gets big for short periods before someone brings me down to earth. But a couple of inches head room would really be worthwhile.
|
|
|
|
|
05-26-2012
|
#4 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
Re: Gurney Bubble Targa Top
Lee,
You should ask the guys from Melrose. |
|
|
|
|
05-28-2012
|
#5 |
  
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,454
|
Re: Gurney Bubble Targa Top
I agree, same issue. When wearing a helmet, I have to
sit all wierd to fit. ~6ft, 1". Locobob showed me a trick to help a little: Lift up the seat bottom and unclip the 2 seat straps. You sit a little lower and gain some room. I saw a Corvette at Spring Mountain with the bubble top. Looked Kinda funny, but functional. I wonder if there are any safety issues. Rolling the car with your head beyond the halo can't be good. Last edited by tf95ZR1; 05-28-2012 at 02:11 PM. Reason: Wanted 2 |
|
|
|
|
05-28-2012
|
#6 |
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 775
|
Re: Gurney Bubble Targa Top
A friend of mine with a 91 Z is fabricating a roof with bubbles. He is using an old glass top with the glass removed as a frame and forming the top out of fiberglass. He must be 6'3 or '4.
|
|
|
|
|
05-29-2012
|
#7 |
|
Join Date: Jan 2011
Location: Dubai, United Arab Emirates
Posts: 449
|
Re: Gurney Bubble Targa Top
AND a bit more on the lower seat for my fat a_s? Just an inch or two? Without destroying the seat?
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
