Aluminum Pulleys & Stuff

[Pete]

Ok boys.

About 3 years ago i made aluminum pulleys.
I have power sterring,water pump.

I can get water pump 10% underdrive.

Power steering $189
Water Pump $169
Water Pump UD $199

160 Thermostats $79

I also have tailhousings to install 4L80E trans in a C4 $649

I can also regrind cams (need to provide stock cams) $1495
Cam specs:
Set One.
.236 .425 Intake
.220 .425 Exhaust
Set Two.
.240 .440 Intake
.224 .420 Exhaust
Set Two cams are in 2 big inch LT5's and run 10's @ 134mph
These 2 cars drive and run like stock Z's

I also have Elecric Water Pump set up if any one is interested.
I can also rebuild stock clutch pressure plates $225

Just thought i'd put this out there.

All my stuff is made in the USA.

Pete

[pantera1683]

I'll take one water pump underdrive pulley please.

And just to be clear, can I use the stock lifters with the Set Two cams?

[Pete]

Originally Posted by pantera1683

I'll take one water pump underdrive pulley please.

And just to be clear, can I use the stock lifters with the Set Two cams?

If there are used,i would not suggest it.
I suggest the Melling JB-2236 you can find these from $12-$20 each.

Pantera i had 4 sets of non UD and are all sold it will take about 3-4 weeks for new batch let me know if this time frame works for you.

Pete

[Pete]

Pantera,please let me know if your interested in the pulley.

I will need payment.

PayPal: Petezr1@gmail.com
Please add $10 for shipping

Thanks
Pete

[pantera1683]

Originally Posted by Pete

If there are used,i would not suggest it.
I suggest the Melling JB-2236 you can find these from $12-$20 each.

Pantera i had 4 sets of non UD and are all sold it will take about 3-4 weeks for new batch let me know if this time frame works for you.

Pete

I have a brand new set of stock lifters, so I should be good would those?

[DaveK]

Just curious, what kind of power differentials do you see with the aluminium pulleys (regular or underdrive) same with the electric water pump?

Is this stuff really just for race cars or is it okay on a street car?

thanks

Dave

[Pete]

Originally Posted by DaveK

Just curious, what kind of power differentials do you see with the aluminium pulleys (regular or underdrive) same with the electric water pump?

Is this stuff really just for race cars or is it okay on a street car?

thanks

Dave

Electric Water Pump has gains 5-10 hp.

Never did a before and after on the pulleys
The aluminum pulleys are half the weight of stock pulleys.

Pete

[pantera1683]

Is the underdrive water pump pulley larger in diameter than stock. I just realized I have a camber brace installed and it sits pretty close to the stock pulley.

[Pete]

Originally Posted by pantera1683

Is the underdrive water pump pulley larger in diameter than stock. I just realized I have a camber brace installed and it sits pretty close to the stock pulley.

New lifters should be good.

The front of the pulley is a bit thicker over the stock one but i don't think by that much,i don't have one in front of me at this time so i could not tell you how much more.
If you have 1/2" clearance it will fit.

Pete

[Pete]

Forgot to add.
If anyone is interested

401 ci short block $9995 (w/rebuildable core)4-6 weeks.

Pete