VHT Wrinkle Coating - ZR-1 Net Registry Forums

LGAFF · 01-02-2012

Well, I was going to PC my intake but I had most of it done already in VHT so I am going to leave as is.....of course after alot of trial and error the key to a good VHT finish is preheating the parts and giving it low heat as it dries...

I had an issue with the plenum paint not wrinkling, my garage was 65-66 degrees, can says 60 is ok, so after some frustration....I heated up the intake with a hiar dyer, painted it, then brought it into the basement with temp set at 72, placed the hair dryer in the TB opening on low air and hot....stuff worked great.

PS: keep the hair dryer rear intake clear so it does not overheat....and stay close by I do not want anyone burning down their house.

WB9MCW · 01-02-2012

Wow great idea. You amaze me with your innovations -- yer getting as good as the Greek on all things ZR-1 -- Kudos to you Lee.

This year I will try to visit you at your home shop on a nice weekend day to chat and BS.

PM me your cell # so I can put it into my cell memory that way when I am out on a romp with the ZE-1 I can call to see if you are available for a pop and stop visit. My cell is 815-790-4494

XfireZ51 · 01-02-2012

Lee,

I tried the VHT stuff last year when I did the cam covers. Didn't work well and so we went a different route. Used another wrinkle paint in black and then added whatever color I wanted on top of that.. Not sure yet how I will do the plenum and injector housings this year. Considering a silver with cam cover red for the inset.

LGAFF · 01-02-2012

Dom when you heat the stuff up, its great and consistent, you can see on my plenum where it wrinkled some before I used the heat method. When I do the next one, will heat the intake to 200 and then paint, then put the hair dryer in on it

01-02-2012	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	VHT Wrinkle Coating Well, I was going to PC my intake but I had most of it done already in VHT so I am going to leave as is.....of course after alot of trial and error the key to a good VHT finish is preheating the parts and giving it low heat as it dries... I had an issue with the plenum paint not wrinkling, my garage was 65-66 degrees, can says 60 is ok, so after some frustration....I heated up the intake with a hiar dyer, painted it, then brought it into the basement with temp set at 72, placed the hair dryer in the TB opening on low air and hot....stuff worked great. PS: keep the hair dryer rear intake clear so it does not overheat....and stay close by I do not want anyone burning down their house. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

01-02-2012	#2
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: VHT Wrinkle Coating Wow great idea. You amaze me with your innovations -- yer getting as good as the Greek on all things ZR-1 -- Kudos to you Lee. This year I will try to visit you at your home shop on a nice weekend day to chat and BS. PM me your cell # so I can put it into my cell memory that way when I am out on a romp with the ZE-1 I can call to see if you are available for a pop and stop visit. My cell is 815-790-4494 __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

01-02-2012	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: VHT Wrinkle Coating Lee, I tried the VHT stuff last year when I did the cam covers. Didn't work well and so we went a different route. Used another wrinkle paint in black and then added whatever color I wanted on top of that.. Not sure yet how I will do the plenum and injector housings this year. Considering a silver with cam cover red for the inset.

01-02-2012	#4
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: VHT Wrinkle Coating Dom when you heat the stuff up, its great and consistent, you can see on my plenum where it wrinkled some before I used the heat method. When I do the next one, will heat the intake to 200 and then paint, then put the hair dryer in on it __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode