|
|
|
10-19-2011
|
#1 |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Parting out 91 LT5
I have a 91 LT5 I am parting out.
This engine is apart I have most parts still but hit me up with what you need and We can see if I have it and see if we can agree on a price. sold one camshaft need to verify what I have. I believe it was the LH exhaust. Sold Left RH head again let me know what you need and we can talk. jp quick inventory today Used parts from a 30K motor that I intended on building but needed money and parted some of it so now its time to finish the job. 2 bolt block with lader $1000 oil pan $300 oil filter housing $300 LH cylinder head $900 drivers side three camshafts $300 each air horn $100 throttle body Sold power steering pump $350 RH chain tensioner with housing compressed $400 LH chain tensioner with housing compressed $400 front engine cover $150 A/C compresor for 91-up $250 brand new secondary vacum pump the one from the truck $200 Coolant tubes $250 Pistons with conecting rods $100 each I have a a bunch cylinder liners $100 each I have a bunch not from the above block Spark plug wires MFG by Taylor used $40 spark plug wires LT5 sold rear crankshaft seal housing $150 fuel pump assembly used $200 AIR parts group $300 Intake accordian Sold crankshaft is iffy I remember it havind some surface corrosion on it so not sure if it would be worth using to anyone. NEW PARTS White Racing products Crankshaft bearing set $650 Camshaft timing chain wear strips or guide facing I have Two of the cam cover guide facings and three of the ones for the main chains $350 for all of them
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. Last edited by phrogs; 12-07-2011 at 06:27 PM. |
|
|
|
10-19-2011
|
#2 |
|
Join Date: Oct 2008
Location: tampa
Posts: 538
|
Re: Parting out 91 LT5
P&A
Ignition module Ignition module interface board primary timing chain sprocket
__________________
[SIZE=3][B][COLOR=Red]Worlds largest ZR-1 LT5 Parts Store[/COLOR][/B][/SIZE] [URL="http://whiteracingproducts.com/"]http://whiteracingproducts.com[/URL] New & Used Parts, as well as free Locator services. [EMAIL="sales@whiteracingproducts.com"]sales@whiteracingproducts.com[/EMAIL] (813) 264-6368 |
|
|
|
10-19-2011
|
#3 |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Parting out 91 LT5
ECM?
|
|
|
|
|
10-20-2011
|
#4 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Parting out 91 LT5
Plenium and coolant pipes
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-20-2011
|
#5 | |
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
|
Re: Parting out 91 LT5
Quote:
Goldy, I have the coolant pipes off my '90 if you need a set.
__________________
Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19 |
|
|
|
|
|
10-20-2011
|
#6 |
|
Join Date: Jul 2011
Location: Homestead, Fl
Posts: 248
|
Re: Parting out 91 LT5
Plenum and IH...if Goldcyon passes.
thanks sam
__________________
Sam 1991 ZR-1 :salute: |
|
|
|
|
10-20-2011
|
#7 | |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Re: Parting out 91 LT5
Quote:
See above for coolant tubes.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
|
10-20-2011
|
#8 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Parting out 91 LT5
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-20-2011
|
#9 | |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Re: Parting out 91 LT5
Quote:
PM'ed you
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
|
10-20-2011
|
#10 |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
|
Re: Parting out 91 LT5
     
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
