|
|
|
10-11-2011
|
#1 |
 Join Date: Sep 2011
Location: TN
Posts: 581
|
Does anyone use the Innova 3140
I was reading about some scanners and was interested in the Equus 3140 Innova OBD1&2 .. I figure as soon as I can get my car capsule , then I'll get the scanner .. Thanks
|
|
|
|
10-12-2011
|
#2 |
|
Join Date: Feb 2008
Location: Vancouver, BC
Posts: 252
|
Re: Does anyone use the Innova 3140
I've got one in perfect cond gathering dust on my bench.
I prefer the AutoXray 6000 myself If you're interested in an Innova - I'd be happy to helpyou out
__________________
[SIGPIC][/SIGPIC] __________________ 1990 Corvette ZR-1 #2824 4.10's, Custom PROM, Flowmaster, Top End Port NCRS BC Chapter |
|
|
|
|
10-12-2011
|
#3 |
|
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: Does anyone use the Innova 3140
Is yours like this one ? http://www.amazon.com/Equus-3140-Dia...=24TYJ2FG9BLUK
I usually dont buy electronics used but .. If it's like the one listed above and will work with the Z . shoot me an email... |
|
|
|
|
10-12-2011
|
#4 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Does anyone use the Innova 3140
I use the 6000 as well. If your planning on keeping the ZR-1 for a while maybe you should consider a TECH-1A. Its old school and can be picked up fairly cheap on Ebay and Craigslist but it was the same tool the techs used at GM
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-13-2011
|
#5 |
|
Join Date: Feb 2008
Location: Vancouver, BC
Posts: 252
|
Re: Does anyone use the Innova 3140
Sorry, I mislead you... just got back from a trip and checked - mine is a 3120, not a 3140.
__________________
[SIGPIC][/SIGPIC] __________________ 1990 Corvette ZR-1 #2824 4.10's, Custom PROM, Flowmaster, Top End Port NCRS BC Chapter |
|
|
|
|
10-13-2011
|
#6 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Does anyone use the Innova 3140
You'd want to contact them and see first if they will work on the Z. I use AutoXray, and they were able to post a download for mine. However, it was a "special", in terms of "we don't get much call for that one". So, I'd ask 'em about that first. Our ECMs are warmed over L98 units, and there are plenty of them around. So, logically speaking...But, till ya ask 'em...
 The price is right tho. If you try one out, be sure to let us know how it works out! P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
10-13-2011
|
#7 |
|
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: Does anyone use the Innova 3140
Thanks for all the info.. I'll do some checking ..
|
|
|
|
|
10-13-2011
|
#8 |
|
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: Does anyone use the Innova 3140
I just talked to the company . They said it will work / That the computer is basically the same as a standard vette.. I dont know if this is correct ? The dude that answered sounded like he was 1/2 asleep . ( probably one of the walking dead
 any opinions ?
|
|
|
|
|
10-13-2011
|
#9 |
|
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: Does anyone use the Innova 3140
There is a Tech 1A on ebay .. $420.00 but it only does up to 1995 which is great for the vette but doesn't do new cars. Will it do something that the Innova or auto-xray can't do or do it better ?
|
|
|
|
|
10-14-2011
|
#10 |
|
Join Date: Feb 2008
Location: Vancouver, BC
Posts: 252
|
Re: Does anyone use the Innova 3140
There is lots that the autoX-ray does not do that I assume (dangerous word) the Tech will do - for example the ABS, A/C and FX-3 modules. The auto-Xray basically will read an log data from the ECM and reset trouble codes - thats about it.
__________________
[SIGPIC][/SIGPIC] __________________ 1990 Corvette ZR-1 #2824 4.10's, Custom PROM, Flowmaster, Top End Port NCRS BC Chapter |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
