My Saturday Projects - ZR-1 Net Registry Forums

XfireZ51 · 10-04-2011

With fall and winter approaching, time to get some projects completed before putting ZR away before the snow flies. So here's what I did:

1. Oil and filter change
2. Installed my ZT-2 Wideband O2
3. Replaced shift tunnel rubber gasket. Old one was ripped and heat came
up from exhaust.
4. Removed oil pan stud to seal oil leak. I used Black RTV on the stud and
then used a Doty washer to provide an additional seal. So far the stud
is oil free. No more oil leaks. If this doesn't work, it'll be time to replace
pan gasket next year.
5. Made appt for tuning for WOT on 10.14 at Speed Inc dyno.

GOLDCYLON · 10-04-2011

You be impressed how #3 will keep the cup holder cooler as well

PhillipsLT5 · 10-05-2011

GC, I want to know how you have a cool cup holder in AZ?
xfirez51, you can come out to AZ for more projects, I still had the A/C in garage on today, Were not putting them away, just the opposite, breakin them out

GOLDCYLON · 10-05-2011

"cooler" is a realative term lol

XfireZ51 · 10-05-2011

Quote:

Originally Posted by GOLDCYLON

You be impressed how #3 will keep the cup holder cooler as well

Huge difference. And likely contributed to the smelling of
oil altho I did have oil leaking. Now, no further oil smell at WOT.
One more project this weekend. Gotta grease up the poly bushings I installed on front shocks.

Paul Workman · 10-05-2011

If possible, I'll try to get by on the 14th to see your pulls.

My "to do" list includes:

Pulling the cluster and replacing the tach resistor and filter cap (as needed) to restore accuracy (reading 20% high)
Maybe replacing the heater core...

... NOT looking forward to that one.
Installing the new carpet on the door panels - to finish off that chore (new carpet...looks great!)

Marc bumped the rev limit to 7600 (in prep for Sunday's festivities!) and bumped the IAC on deceleration to see if that would cure the annoying stalling.

As expected, it was leaving a lot of raw meat on the table with the limiter set at the stock 7200. Now I'll be able to shift according to performance rather than avoidance (of hitting the limiter, which was frustrating a good bit of performance).

The occasional stalling...was reduced (by hanging the high idle a bit longer), but the stalling is not entirely cured. The IAC "fix" seems to address the symptom and not so much the root cause. (Which leads me to another project: Find out why my stupid computer will not "see" my scanner anymore and get that resolved so maybe I can see what the heck is going on on decel!

)

P.

10-04-2011	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	My Saturday Projects With fall and winter approaching, time to get some projects completed before putting ZR away before the snow flies. So here's what I did: 1. Oil and filter change 2. Installed my ZT-2 Wideband O2 3. Replaced shift tunnel rubber gasket. Old one was ripped and heat came up from exhaust. 4. Removed oil pan stud to seal oil leak. I used Black RTV on the stud and then used a Doty washer to provide an additional seal. So far the stud is oil free. No more oil leaks. If this doesn't work, it'll be time to replace pan gasket next year. 5. Made appt for tuning for WOT on 10.14 at Speed Inc dyno.

10-04-2011	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: My Saturday Projects You be impressed how #3 will keep the cup holder cooler as well __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-05-2011	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: My Saturday Projects "cooler" is a realative term lol __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-05-2011	#6
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: My Saturday Projects If possible, I'll try to get by on the 14th to see your pulls. My "to do" list includes: Pulling the cluster and replacing the tach resistor and filter cap (as needed) to restore accuracy (reading 20% high) Maybe replacing the heater core... ... NOT looking forward to that one. Installing the new carpet on the door panels - to finish off that chore (new carpet...looks great!) Marc bumped the rev limit to 7600 (in prep for Sunday's festivities!) and bumped the IAC on deceleration to see if that would cure the annoying stalling. As expected, it was leaving a lot of raw meat on the table with the limiter set at the stock 7200. Now I'll be able to shift according to performance rather than avoidance (of hitting the limiter, which was frustrating a good bit of performance). The occasional stalling...was reduced (by hanging the high idle a bit longer), but the stalling is not entirely cured. The IAC "fix" seems to address the symptom and not so much the root cause. (Which leads me to another project: Find out why my stupid computer will not "see" my scanner anymore and get that resolved so maybe I can see what the heck is going on on decel!) P. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-05-2011	#3
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: My Saturday Projects GC, I want to know how you have a cool cup holder in AZ? xfirez51, you can come out to AZ for more projects, I still had the A/C in garage on today, Were not putting them away, just the opposite, breakin them out