Is there a good enclosed trailer you can OPEN Corvette doors in/out - ZR-1 Net Registry Forums

Corvette95 · 02-14-2006

I want to get an inexpensive enclosed trailer (18ft?) for local use. I want one that the Vette wont scrub the nose loading and unloading and also one that I can get in / out of the car with (dont want to winch it in). Anyone have any ideas?

RICKYRJ1 · 02-17-2006

Not going to be inexpensive for what you want. Pace , Haulmark, and Car-Mate are some quality trailers. You can customize them to fit your needs. Is it for the new Z? I have a Car-Mate 7x14 that I use for my track bikes but it is to small to fit my ZR1. I believe the smallest you can go is a 8x18. Good Luck keep us posted

Corvette95 · 02-18-2006

What about this one? Any thoughts?
http://www.trailershowroom.com/8_5X20.htm

Meanmyz · 02-20-2006

I have a Pace American enclosed trailer that I love. I had it made specifically for my own needs a few years ago. It isn't the cheapest, but you get what you pay for. IMO Pace is one of the best in the industry.

When I get a chance, I will try and post some pictures. I also have to learn how to post them.

My trailer is a 2003 Pace Aire, which is built from the Cargo Sport models. It's front end is angled (NOT the V front). From about half way up in front, it is angled. Very stylish. My trailer is a 22 footer. It really doesn't seem that long, but gives me all the space I need.

Perfect for hauling my 8000 mile '94 ZR-1 or 24,000 mile '85 to shows. I will post pics when I get a chance.

Meanmyz

Corvette95 · 02-20-2006

thanks, what is the width, do you drive your car in and out and can OPEN the doors?

Z Factor · 02-21-2006

Quote:

Originally Posted by Meanmyz

Meanmyz

Hello, and welcome to the forum.

wolverinemw · 02-21-2006

Most trailers I have seen use a built up floor with a drivers side trailer door. You either must have a trailer with a high center of gravity, or removeable wheel houses, or a built up floor as there is no way of escaping the tires on the trailer. Low floor height means high inner wheel houses. High floor height means lower wheel houses. Buy what you want and modify it to your needs. Laying down two 10 ft 2x6's per side will give you 4 mores inches of door clearance, it will also raise your center of gravity, which is the rub here, there is no way to cheat the design physics that I know of besides removeable wheel houses, short trailer tires, or moving the wheel spread on the trailer outboard. Sorry I don't know of a trailer to do this right now.

Meanmyz · 02-21-2006

http://putfile.com/pic.php?pic=2/5115462259.jpg&s=x10
http://putfile.com/pic.php?pic=2/511543319.jpg&s=x11
http://putfile.com/pic.php?pic=2/5115482963.jpg&s=x10

Here are a few pics of my trailer. When it was built, the only thing I didn't have Pace do was finish the walls or the floor for cost reasons at the time. I plan on doing that myself in the next couple years. I will probably use white aluminum for the walls and I am looking at options for the floor. Maybe checkerboard or marble look vinyl, or just painting it. Or, I may have the floor sprayed with Line-X for ultimate durability.

The trailer is as wide as can be legally made..my specs are at home..I believe it is 102" or about 8.6'. The trailer has a beaver tail (ramped floor), but once parked inside I must be about 2 feet past that. As I said, the ceiling is finished and it has 4' flourescent lighting which needs an outside power source plugged into the trailer, to work. It also has lights in the front and rear (inside) in which power is supplied by the tow vehicle through the brake lights.

Instead of D-rings for tie-downs, I used E-track on the floor and sidewalls. This gives the ability to tie things down anywhere in the trailer.

There is a 3' extended flap attached to the ramp door. This along with the beavertail gives me the clearance to easily get into the trailer with the cars. (I need to fix the aluminum trim on the flap and will do so by putting diamond plate on it).

If you have any other questions, feel free to ask.

Meanmyz · 02-21-2006

I forgot to add: The trailer works great for getting cars to shows all prepped and ready to show, and in keeping mileage on the cars low. But... the biggest reason I needed a trailer is because I live on two miles of gravel road!!!

When I bought the Z, I decided that I was NOT going to drive this car on gravel.

You guys that live on tar got it easy

. Things are never as easy as just hopping in and going for a ride. And, I just can't get the county to pave this lil ol' road for me!

Corvette95 · 02-22-2006

THANK YOU! That was EXACTLY the information I was looking for. I WANT YOUR TRAILER. What do I ask for when I want a drivers side door like you have (specs) also what length is your trailer? Dont answer if you dont want to but what is a good price for a trailer like yours? With the Etrack how long does it take to tie it down?
Thanks Again!
Chris
Corvette95bham

02-14-2006	#1
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Is there a good enclosed trailer you can OPEN Corvette doors in/out I want to get an inexpensive enclosed trailer (18ft?) for local use. I want one that the Vette wont scrub the nose loading and unloading and also one that I can get in / out of the car with (dont want to winch it in). Anyone have any ideas? __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

02-17-2006	#2
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out Not going to be inexpensive for what you want. Pace , Haulmark, and Car-Mate are some quality trailers. You can customize them to fit your needs. Is it for the new Z? I have a Car-Mate 7x14 that I use for my track bikes but it is to small to fit my ZR1. I believe the smallest you can go is a 8x18. Good Luck keep us posted

02-18-2006	#3
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out What about this one? Any thoughts? http://www.trailershowroom.com/8_5X20.htm __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

02-20-2006	#4
Meanmyz Join Date: Feb 2006 Location: Springfield, Minnesota Posts: 446	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out I have a Pace American enclosed trailer that I love. I had it made specifically for my own needs a few years ago. It isn't the cheapest, but you get what you pay for. IMO Pace is one of the best in the industry. When I get a chance, I will try and post some pictures. I also have to learn how to post them. My trailer is a 2003 Pace Aire, which is built from the Cargo Sport models. It's front end is angled (NOT the V front). From about half way up in front, it is angled. Very stylish. My trailer is a 22 footer. It really doesn't seem that long, but gives me all the space I need. Perfect for hauling my 8000 mile '94 ZR-1 or 24,000 mile '85 to shows. I will post pics when I get a chance. Meanmyz

02-20-2006	#5
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out thanks, what is the width, do you drive your car in and out and can OPEN the doors? __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

02-21-2006	#7
wolverinemw Join Date: Jan 2006 Location: Detroit, MI Posts: 26	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out Most trailers I have seen use a built up floor with a drivers side trailer door. You either must have a trailer with a high center of gravity, or removeable wheel houses, or a built up floor as there is no way of escaping the tires on the trailer. Low floor height means high inner wheel houses. High floor height means lower wheel houses. Buy what you want and modify it to your needs. Laying down two 10 ft 2x6's per side will give you 4 mores inches of door clearance, it will also raise your center of gravity, which is the rub here, there is no way to cheat the design physics that I know of besides removeable wheel houses, short trailer tires, or moving the wheel spread on the trailer outboard. Sorry I don't know of a trailer to do this right now.

02-22-2006	#10
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Is there a good enclosed trailer you can OPEN Corvette doors in/out THANK YOU! That was EXACTLY the information I was looking for. I WANT YOUR TRAILER. What do I ask for when I want a drivers side door like you have (specs) also what length is your trailer? Dont answer if you dont want to but what is a good price for a trailer like yours? With the Etrack how long does it take to tie it down? Thanks Again! Chris Corvette95bham __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode