My own fire sale list

[VetteMed]

Secondary Vacuum pump, nearly new, $80

McLeod Aluminum Flywheel, new, $250

ACDelco spark plug wire set SOLD

90-93 sport seat lumbar inflation pump SOLD


Red rear Corvette emblem 91-95 SOLD
Aqua rear Corvette emblem 91-95 $45 previously mounted but very nice
Black with silver rear ZR-1 emblem $40 new unmounted
White LT5 emblems SOLD
CNC'd black aluminum faceplate for mounting single DIN radio in dash, has CORVETTE machined into face $40

LT5 starter, needs rebuild, $50
Saddle tire strap for cargo area $75
Spare ECM, unknown if functional SOLD
FX3 controller 90-91? SOLD
Fuel door assembly, white, fair condition, emblem faded SOLD
Front a-arms SOLD
Rear camber rods $10 each LEFT SIDE PENDING
Rear trailing arms $5 each

ZR-1 License plate surround / frame SOLD
Chrome oil filter cover SOLD
used fuel pump assembly, no pumps, working sender SOLD

91 ex manifolds, bad cats, crack in pass side cat housing, $50 each

Baer eradispeed rear rotors, one is cracked, other is OK, $40 for good one, cracked is free with purchase SOLD

Rear calipers $40
Rear abutment brackets $40

post wants in this thread. All prices plus shipping.

[xlr8nflorida]

Got a photo of rear eradispeed rotors?

Might be interested in both. Are they drilled slotted 2 piece?

[VetteMed]

I can get pics tomorrow. They are drilled and slotted 2-piece, the center hats are in good shape on both.

[XfireZ51]

Pass. side rear camber rod. Is the trailing arm
the rear lower control arm?

[VetteMed]

Originally Posted by XfireZ51

Pass. side rear camber rod. Is the trailing arm
the rear lower control arm?

Yes, the trailing arms are the upper and lower control arms in the rear.

[XfireZ51]

Originally Posted by XfireZ51

Pass. side rear camber rod. Is the trailing arm
the rear lower control arm?

Forgive me for looking to clarify a bit further.
Control arm is NOT the dog bone but the arm extending from diff
to lower hub carrier assembly. Correct? If so, we can make arrangements for that and the tie rod.

[VetteMed]

Originally Posted by XfireZ51

Forgive me for looking to clarify a bit further.
Control arm is NOT the dog bone but the arm extending from diff
to lower hub carrier assembly. Correct? If so, we can make arrangements for that and the tie rod.

The tie rod assembly, I don't have.
The camber rod, which extends from the bottom of the diff, to the bottom of the knuckle, I do have, for both sides.

[Pete]

If the FX controller works for 1991 i will take it.
and
If the rear rotors fit/work with stock calipers i will take them,if not sold.

Please PM or email me pictures.
petezr1@gmail.com


Pete

[ZR-71]

Is that license plate frame the black wide plate cover? I so I would like it. PLease let me know
Dave

[ZR1@gmx.com]

I would be interested in the White LT5 emblems. Can you send a photo?
How many do you have?