|
|
|
08-09-2010
|
#1 |
|
Join Date: Jul 2005
Posts: 190
|
Lowering Bolts
Put in longer bolts to bring my rear down a little. Got it where I want it, [27 1/2" from ground to lip of rear wheelwell]. On passenger side I have a 1/4" of bolt left after locking nut, drivers side I have 1 3/4". Is it normal for their to be that much difference side to side?
|
|
|
|
08-09-2010
|
#2 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: Lowering Bolts
Rear spring droop. Pretty normal
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
08-09-2010
|
#3 |
 
Join Date: Jun 2004
Location: Texas
Posts: 2,418
|
Re: Lowering Bolts
You can't trust body panels for level area. There are factory measuring points but they escape me right now
 Good luck
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
08-09-2010
|
#4 | |
|
Join Date: May 2009
Location: S Nevada
Posts: 351
|
Re: Lowering Bolts
Quote:
Lowing the rear using the bolts can "soften" and add bouncey-ness  Since your already uneven, hell of a time to replace that spring with the one in my other post, Im pretty sure thats the most stout spring ever for a vette, and i buy it in a flash if I still had a corvette. BMH Rate |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
