Interior and trim - ZR-1 Net Registry Forums

Don in VT · 07-23-2010

Hi All,

Just wondering if there is a link for information on taking apart the interior bits and pieces ? Things like -- door panels, dash plastic pieces, switches and knobs.

On my 87 it is a breeze to like change out the stereo head, A/C controls and electronic speedo,tach module. I am hoping for something similar for the new dash design.

Thanks,

Don

Hammer · 07-23-2010

If you are going to work on the car, please get a service manual. There are lots of things you can work on yourself, but if you don't have a SM you'll have problems.

Case in point, on the passenger door, there is a screw behind the electrical up and down button that must removed to remove the panel. That's in the SM, but you'd never know it was there if you didn't have one.

http://www.helminc.com/helm/Result.a...ected%5Fmedia=

Welcome aboard folks.

secondchance · 07-23-2010

Quote:

Originally Posted by Hammer

If you are going to work on the car, please get a service manual. There are lots of things you can work on yourself, but if you don't have a SM you'll have problems.

Case in point, on the passenger door, there is a screw behind the electrical up and down button that must removed to remove the panel. That's in the SM, but you'd never know it was there if you didn't have one.

http://www.helminc.com/helm/Result.a...ected%5Fmedia=

Welcome aboard folks.

After a total of 15 years of ownership, dare I say I know how to take most apart.
Please feel free to contact me if you have specific task on hand.

-=Jeff=- · 07-23-2010

I too have done my share.. after the Dash swap in my 89 to a 91 I know my way around C4s fairly well

07-23-2010	#1
Don in VT Join Date: Jul 2010 Location: Fairfax, VT Posts: 203	Interior and trim Hi All, Just wondering if there is a link for information on taking apart the interior bits and pieces ? Things like -- door panels, dash plastic pieces, switches and knobs. On my 87 it is a breeze to like change out the stereo head, A/C controls and electronic speedo,tach module. I am hoping for something similar for the new dash design. Thanks, Don

07-23-2010	#2
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Interior and trim If you are going to work on the car, please get a service manual. There are lots of things you can work on yourself, but if you don't have a SM you'll have problems. Case in point, on the passenger door, there is a screw behind the electrical up and down button that must removed to remove the panel. That's in the SM, but you'd never know it was there if you didn't have one. http://www.helminc.com/helm/Result.a...ected%5Fmedia= Welcome aboard folks. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I] Last edited by Hammer; 07-23-2010 at 04:09 PM.

07-23-2010	#4
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Interior and trim I too have done my share.. after the Dash swap in my 89 to a 91 I know my way around C4s fairly well __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode