|
|
|
07-18-2010
|
#1 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Cylinder Head Secondary Shaft Bore Plugs
For the 402 LT5 stroker project I will be ditching the secondaries.
Turned out these aluminum pieces on the lathe to plug the shaft bores remaining in the cylinder heads. The plugs are slightly oversized, sealed with a dab of Loctite 462 and driven in with a hammer. Protruding part will be taken care of during porting. For the upper blind hole I drilled a small hole through the plug in order to vent the air trapped behind it as it was driven in.   
|
|
|
|
07-18-2010
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cylinder Head Secondary Shaft Bore Plugs
Are you an engineer/machinist or sumpthin?
Very nice Phil.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
07-18-2010
|
#3 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Cylinder Head Secondary Shaft Bore Plugs
Thanks Jerry, I'm an engineer and picked up running machine tools while in the navy.
I now work for MAN Diesel & Turbo. http://www.mandieselturbo.com/0000002/Home.html |
|
|
|
|
07-19-2010
|
#4 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cylinder Head Secondary Shaft Bore Plugs
I knew you were an engineer Phil, from our conversation in Alexandria last year. I was just funnin' with you.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
07-19-2010
|
#5 |
 
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,191
|
Re: Cylinder Head Secondary Shaft Bore Plugs
Nice work Phil, looks like the beginning of a quality project!
__________________
Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium |
|
|
|
|
07-19-2010
|
#6 |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Cylinder Head Secondary Shaft Bore Plugs
Phil, you are a true craftsman!!! Wish I could do that stuff with metal.
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
