|
|
|
03-11-2010
|
#1 |
|
Join Date: Jul 2005
Posts: 190
|
Welding Cat-Back Exhaust.
For those of you who have welded your exhaust to keep the tips from turning. I have Stainless Works headers and Flowmaster cat-back, tired of the muffler tips not staying straight no matter how tight the clamps are.
How many of the connections do I have to weld? All of them? Just the last two,[exhaust pipe out of resonator, and muffler]? Or do you just weld the last junction, [the mufflers]? Lastly does the weld have to be all the way around the pipe or just tac welded in 3 or 4 spots per joint? Thanks |
|
|
|
03-11-2010
|
#2 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: Welding Cat-Back Exhaust.
on my flowmaster system i just tacked in 3 places on each pipe .i tacked where the mufflers connect to the exhaust, and the connection just before it gets to the rear end
|
|
|
|
|
03-12-2010
|
#3 |
 Join Date: Dec 2005
Location: Huntley IL
Posts: 170
|
Re: Welding Cat-Back Exhaust.
Weld all connections . You just need to weld 1/4 to1/2 inch in one spot to keep it from turning . It would have to break the weld to move.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
