|
|
|
02-21-2010
|
#1 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Where to find a Torque Honing Plate
Starting to locate sources for the special tools I will be needing to assemble the LT5 stroker motor I've got in the works. To go the 402 CID route with the 4.0" crank I have 4.0" liners will be required. Anybody have a good suggestion on where I can borrow, rent, or otherwise acquire reasonably a 4.0" torque honing plate for an LT5? Right now I'm thinking of using an local motor machine shop that is well versed in automotive engine liner installations but unfortunately they do not have a LT5 torque plate on hand for finishing the liners once they are installed in the block. Found a source for a BJH plate here: http://www.cylinderheadsupply.com/6604.html
No doubt a nice plate but a lot of $$ for just one engine build. Would prefer to spend the money elsewhere if possible. Thanks, Phil |
|
|
|
02-21-2010
|
#2 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: Where to find a Torque Honing Plate
you might ask flyn ryan if he knows someone
|
|
|
|
|
02-22-2010
|
#3 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Where to find a Torque Honing Plate
Hi Phil
For that price you might be better off sending the motor to someone like Marc or Ryan to have it honed and shipped back to you. Just an idea. See you at BG  Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
02-22-2010
|
#4 |
|
Join Date: Sep 2005
Location: Washington
Posts: 955
|
Re: Where to find a Torque Honing Plate
Jeff and I bought one or 2 for the shop thats doing the work on my 402 and 368. At least i think Jeff went in on part of it
|
|
|
|
|
02-22-2010
|
#5 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Where to find a Torque Honing Plate
Thanks Kevin, PM sent
|
|
|
|
|
02-25-2010
|
#6 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Where to find a Torque Honing Plate
I found a local machine shop with a water jet table.
Can anyone help me out with a cad drawing of the cut out in either dwg or dxf format? My guess is a head gasket would do for a pattern. |
|
|
|
|
02-26-2010
|
#7 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Where to find a Torque Honing Plate
Phil,
Let me see if I can hustle you up a .jpg of a drawing before you start on it. Dimensions are metric. Dwg sent.......
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 02-26-2010 at 11:41 AM. |
|
|
|
|
02-26-2010
|
#8 | |
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Where to find a Torque Honing Plate
Quote:
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
|
03-02-2010
|
#9 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Where to find a Torque Honing Plate
Yun put together this fine drawing based on a sketch I drew up from the block deck drawing Jerry provided and measuring a head gasket.
Can someone who has made one of these before look it over and let me know if I have missed anything? Thanks, Phil 
|
|
|
|
|
03-02-2010
|
#10 |
|
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Where to find a Torque Honing Plate
Looks good.
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
