|
08-07-2021
|
#10 |
 
Join Date: Aug 2015
Location: Pittsburgh, PA
Posts: 152
|
Re: Minimum Air Idle Adjustment
I know this is an old thread but just went through this procedure and it worked great for me so wanted to give a shout out to Dom and Phil for the procedure and tips. Thanks!
The only exception I ran into is that the 25mm long Hex head idle stop screw was a bit long in my case and the head was barely clearing one of the TB brackets when the throttles are almost full open so I used a 20mm long screw. When I started, my IAC counts were 30 at idle. Now they are 10-12. Thanks again.
__________________
Roger 1990 ZR-1 #2699 Black on Black 15,000 miles Full-time secondaries, 4.10 gears, C-beam plates, ported top end |
|
|
|
|
Threaded Mode