|
|
|
09-02-2016
|
#1 |
 Join Date: Mar 2013
Location: Roswell, GA
Posts: 234
|
90 degree adaptor for Fuel Pressure Test Hose
Trying to get my hose on the fuel rail schrader valve is a PITA. I was wondering if anyone knows of a 90 degree fitting that will screw into the test hose and over the fuel rail valve? All I can find are 90 degree fittings with a quick disconnect on the test hose side.
__________________
1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp |
|
|
|
09-02-2016
|
#2 |
 Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
Re: 90 degree adaptor for Fuel Pressure Test Hose
This is from memory so may not be accurate - I think it is a standard thread (something like 3/8-24 or AN-6. I had a fitting that fit, and I was able to cobble together a pressure tester. I think I temporarily removed the inner Schrader valve during the test.
I'll probably be around on Saturday if you want me to check to see if I have something you can borrow. |
|
|
|
|
09-02-2016
|
#3 |
|
Join Date: Mar 2013
Location: Roswell, GA
Posts: 234
|
Re: 90 degree adaptor for Fuel Pressure Test Hose
I was looking for an adapter to keep on hand. I guess if the valve is removed for testing, that would open up some possibilities. I have of bunch of misc. fittings I will try. Thanks for the idea!
__________________
1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp |
|
|
|
|
09-02-2016
|
#4 |
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,253
|
Re: 90 degree adaptor for Fuel Pressure Test Hose
Replacement Bicycle Pump Head?
|
|
|
|
|
09-02-2016
|
#5 |
|
Join Date: Mar 2013
Location: Roswell, GA
Posts: 234
|
Re: 90 degree adaptor for Fuel Pressure Test Hose
Thread size is not big enough.
__________________
1995 ZR1 #159 Ported,Corsa,4.10 Rear, Dual Disc RAM Clutch, Alum Flywheel, Haibeck Chip, ZFDoc Plates, Relocated Battery 400 rwhp 1992 ZR1 #280 Ported, Locked Secondary's, Flowmaster Exhaust, Haibeck Chip, 375rwhp 1996 Collectors LT4 (Stock) 1972 Convertible 434 Small Block 572 rwhp |
|
|
|
|
09-02-2016
|
#6 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: 90 degree adaptor for Fuel Pressure Test Hose
check nitrous fittings for fuel rails.....or speed shop
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
|
|
Hybrid Mode
