Beware charcoal canister breakdown!

[HAWAIIZR-1]

Okay, so the cannister that is in my 1990 MY is GM 17087214. The thing that sucks is it does not seem to have a cross reference to AC Delco and when going to Standard Motor Products cross reference the have going to CP1032 again...............

Now my question is why the parts manual for our cars has a different part number and no where does it reference GM 17087214? Oh well, another 1990 part nightmare.

[Corbusa]

Does anyone know if a ? standard 88-89 vette canister is different than a Z?or what about a truck.? Its just a can - maybe they will be the same.. Or like tom said - cut it open and replace the coal..

[-=Jeff=-]

here you go:
CHEVROLET BLAZER 1995
CHEVROLET CAMARO (1984 - 1986)
CHEVROLET CORVETTE (1986 - 1990)
CHEVROLET S10 BLAZER (1992 - 1994)
CHEVROLET S10 PICKUP 1992
GMC JIMMY (1992 - 1994)
GMC SONOMA (1992 - 1995)
OLDSMOBILE BRAVADA (1992 - 1994)
PONTIAC FIREBIRD (1984 - 1986)
PONTIAC J2000 (1984 - 1985)
PONTIAC SUNBIRD 1986

All use the same canister. I got mine at Rock Auto they show the ACDelco one for 88.79..

[HAWAIIZR-1]

Originally Posted by -=Jeff=-

here you go:
CHEVROLET BLAZER 1995
CHEVROLET CAMARO (1984 - 1986)
CHEVROLET CORVETTE (1986 - 1990)
CHEVROLET S10 BLAZER (1992 - 1994)
CHEVROLET S10 PICKUP 1992
GMC JIMMY (1992 - 1994)
GMC SONOMA (1992 - 1995)
OLDSMOBILE BRAVADA (1992 - 1994)
PONTIAC FIREBIRD (1984 - 1986)
PONTIAC J2000 (1984 - 1985)
PONTIAC SUNBIRD 1986

All use the same canister. I got mine at Rock Auto they show the ACDelco one for 88.79..

Thanks Jeff. I'll check it out. Any part number by chance? I checked several applications shown and part numbers are all over the place. For example, the 85 Camaro take a different cannister for 4 cyl vs. V8 and some of the others show CP1032 too that does not have the bottom port. Please share the part number you got with the fitment for the MY 90 with bottom port. Otherwise they seem the same, but don't show a photo of the bottom. I did not check as to where that bottom hose goes too since everything else is the same on top.

[-=Jeff=-]

ACDelco 215155

Standard Motor Products: CP1032

[HAWAIIZR-1]

Originally Posted by -=Jeff=-

ACDelco 215155

Standard Motor Products: CP1032

Thanks Jeff. If you don't mind getting the GM number on the part that would be great. CP1032 did not work for 90 MY so far. Not sure what a AC Delco 215-155 looks like and what GM part number it cross-references to. Man, this stuff is a little confusing................

[-=Jeff=-]

17113150

[HAWAIIZR-1]

Originally Posted by -=Jeff=-

17113150

Thanks, I just saw this in my earlier post where I showed the photos of the Rock Auto listings. I have one on the way so we'll see when it arrives, but the one in the car is 17087214. So you are saying that 17113150 does have the port and fitting on the bottom.

Craig

[-=Jeff=-]

so what does not fit about it? do you have a picture of the original and the replacement?

[HAWAIIZR-1]

Originally Posted by -=Jeff=-

so what does not fit about it? do you have a picture of the original and the replacement?

The only difference is the bottom of the cannister on the original has a L angled connector with a hose on it. The two different part numbers that I bought has a flat bottom with no connector for the hose on the bottom. I don't have any photos as I did not completely remove the old one and started too, until I found I did not have the correct part. I have yet to check what the hose leads to. Maybe all 90 MY does not have the same part I have? Mine is SN# 1727 in production if that helps.