|
04-30-2011
|
#21 |
|
Join Date: Apr 2011
Location: Washington
Posts: 3
|
Re: Clutch Pressure Plate Bolts
Hey guys,
I have received the McCleod 1502 bolts. They look and fit like the real deal. The shoulder is 0.375" diameter and 1.160" long. The total bolt length from the bottom of the head to the end of the threads is 1.600" The shoulder extends 0.086" past my LT1 pressure plate So they seem to work perfect for an application using the LT1 thickness pressure plate, which I think, A26B, would be your combo 1 for you ZR1 guys. Thanks everyone for your help. I will post up some pics of the McLeod bolts shortly. |
|
|
|
04-30-2011
|
#22 |
|
Join Date: Apr 2011
Location: Washington
Posts: 3
|
Re: Clutch Pressure Plate Bolts
 
|
|
|
|
|
04-30-2011
|
#23 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Clutch Pressure Plate Bolts
Looks like they should work properly. Thanks for sharing the information with excellent photos. Your work will wrap up this subject with the proper solution to the thinner, replacement pressure plate.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
04-30-2011
|
#24 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Clutch Pressure Plate Bolts
This thread was such a nail bitter. I can finally relax now.
|
|
|
|
|
09-16-2014
|
#25 |
Join Date: Aug 2006
Location: Fishkill, NY
Posts: 87
|
Re: Clutch Pressure Plate Bolts
Just saying 'thankyou' (even if over 3 years later!) to this thread - still very useful stuff.
Steve |
|
|
|
|
10-10-2014
|
#26 | |
|
Join Date: Jun 2013
Location: Toronto
Posts: 783
|
Re: Clutch Pressure Plate Bolts
Quote:
|
|
|
|
|
 |
|
|
Linear Mode
