A/O Engineering ram air - Page 2 - ZR-1 Net Registry Forums

HAWAIIZR-1 · 02-18-2014

Quote:

Originally Posted by USAZR1

Just to update this: I ordered one of Skene Design's license plate mounts for our 94 Z. Made of billet aluminum and utilizing stainless fasteners,this looks like the best alternative I found that will still allow me to retain the A/O Engineering forced air.

Craig,thanks for your help in posting that link and pics of your car w/mount.

Clint & Sherry,

You are very welcome and you won't be disappointed with Skene Design; it is so adjustable too and you can even move it lower than in my photos. Best wishes, Craig

Schrade · 02-18-2014

If my '90 had the original body, instead of the later body, I'd have integrated scoops like the Active Suspension car. Maybe off of an old F/B Formula.

Then an A/O intake could be routed through there...

Locobob · 02-20-2014

Someone ought to make a 90 degree rotating plate housing, it could work like the muffler butterfly assemblies on the Z06 and rotate the plate sideways when in performance mode.

USAZR1 · 02-20-2014

Quote:

Originally Posted by Locobob

Someone ought to make a 90 degree rotating plate housing, it could work like the muffler butterfly assemblies on the Z06 and rotate the plate sideways when in performance mode.

Sounds good but that would get you busted here in Texas.

Karl · 02-20-2014

Something like this?

http://www.youtube.com/watch?v=j9fkV9egfNM

a retractable license plate mount?

Locobob · 02-21-2014

Quote:

Originally Posted by pushrod-v8

Something like this?

http://www.youtube.com/watch?v=j9fkV9egfNM

a retractable license plate mount?

Yep, there are several of these on the market but I've never seen one mounted in the factory Corvette lp hole, not sure if it would fit or not.

Locobob · 02-21-2014

Quote:

Originally Posted by USAZR1

Sounds good but that would get you busted here in Texas.

No front plate? Maybe you should look again officer lol

Karl · 02-21-2014

Goto page two

http://forums.corvetteforum.com/c4-g...mes-etc-2.html

02-18-2014	#12
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: A/O Engineering ram air If my '90 had the original body, instead of the later body, I'd have integrated scoops like the Active Suspension car. Maybe off of an old F/B Formula. Then an A/O intake could be routed through there... __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 02-19-2014 at 04:03 PM.

02-20-2014	#13
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: A/O Engineering ram air Someone ought to make a 90 degree rotating plate housing, it could work like the muffler butterfly assemblies on the Z06 and rotate the plate sideways when in performance mode. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

02-20-2014	#15
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: A/O Engineering ram air Something like this? http://www.youtube.com/watch?v=j9fkV9egfNM a retractable license plate mount? __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

02-21-2014	#18
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: A/O Engineering ram air Goto page two http://forums.corvetteforum.com/c4-g...mes-etc-2.html __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold