Locobob's Interior Mod Thread - Page 21 - ZR-1 Net Registry Forums

Locobob · 04-01-2014

Quote:

Originally Posted by GOLDCYLON

imho looks somewhat black widowish

That's not really a bad thing for a ZR-1 if you know what I mean.

Locobob · 04-23-2014

Finally got my modified seat brackets back, they should be a nice height improvement. Took about 7/8in off the front and maybe 1/4in off the rear. Had to cut down the rear seat mounting studs a bit for clearance.

Modified bracket in foreground:

Locobob · 04-23-2014

Still playing with some color ideas, here are a couple of my attempts to tie in the red door panels and create kind of a wrap around effect with the red.

Borrowed this idea from Caravaggio as you can see here...

XfireZ51 · 04-23-2014

Robert,

Wow! The way the car should have come from the factory in the first place. I like the black/red. Actually, like them both.

GOLDCYLON · 04-23-2014

I like the zr1 interior but not that diamond tuck look on the console side

Locobob · 04-23-2014

Quote:

Originally Posted by GOLDCYLON

I like the zr1 interior but not that diamond tuck look on the console side

I concur, the diamond tuck is not bad when its done subtly but it's too much for me when a contrasting thread color is used.

Locobob · 05-15-2014

I grabbed some red scrap from the upholstery shop and did some very crude mockups, I have decided to go with the red center console surround but the seats are still vexing me.

Locobob · 05-15-2014

Waiting on three different venders for various parts I need for this project, engraving shop has my heated seat switch panels, paint shop has my harness grommets, and sign shop has my custom DIC screen.... arrggg.... hate waiting on stuff.

USAZR1 · 05-16-2014

[QUOTE=Locobob;201388]Still playing with some color ideas, here are a couple of my attempts to tie in the red door panels and create kind of a wrap around effect with the red.

-----------------------------------------------------------------------
Photoshop your new Momo Commando to the above and let's see that,Bob.

Locobob · 05-19-2014

Working on some more wiring while I wait for stuff from vendors. Here is the radio connector. I cut the gray/black wire which is incandescent illumination and connected it to the dimmer wire on the aftermarket head unit. Then I took the other gray/black and the purple/white which are LED and LCD illumination and connected them to a pair of 1K ohm 1/2 watt resistors - need to find a keyed hot to connect these two. This is per bulletin 238311. Was thinking of possibly tapping into one of the two keyed hots which feed the DIC.

04-23-2014	#202
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread Finally got my modified seat brackets back, they should be a nice height improvement. Took about 7/8in off the front and maybe 1/4in off the rear. Had to cut down the rear seat mounting studs a bit for clearance. Modified bracket in foreground: __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

04-23-2014	#203
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread Still playing with some color ideas, here are a couple of my attempts to tie in the red door panels and create kind of a wrap around effect with the red. Borrowed this idea from Caravaggio as you can see here... __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

04-23-2014	#204
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: Locobob's Interior Mod Thread Robert, Wow! The way the car should have come from the factory in the first place. I like the black/red. Actually, like them both. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

04-23-2014	#205
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Locobob's Interior Mod Thread I like the zr1 interior but not that diamond tuck look on the console side __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

05-15-2014	#207
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread I grabbed some red scrap from the upholstery shop and did some very crude mockups, I have decided to go with the red center console surround but the seats are still vexing me. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

05-15-2014	#208
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread Waiting on three different venders for various parts I need for this project, engraving shop has my heated seat switch panels, paint shop has my harness grommets, and sign shop has my custom DIC screen.... arrggg.... hate waiting on stuff. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

05-16-2014	#209
USAZR1 Join Date: Oct 2013 Location: Wichita Falls,Tx Posts: 604	Re: Locobob's Interior Mod Thread [QUOTE=Locobob;201388]Still playing with some color ideas, here are a couple of my attempts to tie in the red door panels and create kind of a wrap around effect with the red. ----------------------------------------------------------------------- Photoshop your new Momo Commando to the above and let's see that,Bob. __________________ Clint & Sherry 1994 ZR-1 White/Red #152 (sold) 1991 ZR-1 Callaway Aerobody #1332 (sold) 1990 ZR-1 Red/Red #952 (sold) 2002 Z06 Torch Red/Mod Red widebody

05-19-2014	#210
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread Working on some more wiring while I wait for stuff from vendors. Here is the radio connector. I cut the gray/black wire which is incandescent illumination and connected it to the dimmer wire on the aftermarket head unit. Then I took the other gray/black and the purple/white which are LED and LCD illumination and connected them to a pair of 1K ohm 1/2 watt resistors - need to find a keyed hot to connect these two. This is per bulletin 238311. Was thinking of possibly tapping into one of the two keyed hots which feed the DIC. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 05-19-2014 at 06:53 PM.