Locobob's Interior Mod Thread - Page 20 - ZR-1 Net Registry Forums

Locobob · 03-26-2014

Quote:

Originally Posted by -=Jeff=-

I dunno,

maybe the red should be on the headrest and down the sides but only on facing of the bolsters..

only thing about the way you have is how will be as far as comfort with the stitching there

I've seen the black center cushions with the red bolsters and headrest and I just wasn't crazy about the look. Trying to find that perfect balance of adding some color without overdoing it...

-=Jeff=- · 03-26-2014

then do all black with red stitching

GOLDCYLON · 03-26-2014

Quote:

Originally Posted by -=Jeff=-

I dunno,

maybe the red should be on the headrest and down the sides but only on facing of the bolsters..

only thing about the way you have is how will be as far as comfort with the stitching there

Concur the red belongs on the bolsters as well avoid the seat pan area

Locobob · 03-26-2014

Quote:

Originally Posted by -=Jeff=-

then do all black with red stitching

I was initially favoring that (its nice and conservative) but I really kinda want a bit more color... what I like about the red headrest area is that it is visible from outside the car and I've always liked the black car with red guts look. On the other hand I don't want to go all red like the factory seats... its just too much for me.... decisions decisions.

-=Jeff=- · 03-26-2014

all red facing, black on sides and backing

USAZR1 · 03-26-2014

Quote:

Originally Posted by Locobob

This is the one I keep coming back to,Bob.

XfireZ51 · 03-26-2014

Bob,

How about modifying that last one just a bit and make the final lower seat section red. The area that supports the lower thigh area. I think that would be consistent w the upper headrest.

Locobob · 04-01-2014

So I tried a few more ideas, all red on the lower cushion was just too much for me.
Here is just the red on top and some stitching around the sub belt grommet.

And here is one I really like, tried to emulate the angles from the headrest on the bottom cushion.

Locobob · 04-01-2014

Sorry about the big pics which don't fit on the screen.... if you right click and select view image then you'll be able to see the entire seat without scrolling.

GOLDCYLON · 04-01-2014

imho looks somewhat black widowish

03-26-2014	#192
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Locobob's Interior Mod Thread then do all black with red stitching __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

03-26-2014	#195
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Locobob's Interior Mod Thread all red facing, black on sides and backing __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

03-26-2014	#197
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: Locobob's Interior Mod Thread Bob, How about modifying that last one just a bit and make the final lower seat section red. The area that supports the lower thigh area. I think that would be consistent w the upper headrest. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

04-01-2014	#198
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread So I tried a few more ideas, all red on the lower cushion was just too much for me. Here is just the red on top and some stitching around the sub belt grommet. And here is one I really like, tried to emulate the angles from the headrest on the bottom cushion. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

04-01-2014	#199
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: Locobob's Interior Mod Thread Sorry about the big pics which don't fit on the screen.... if you right click and select view image then you'll be able to see the entire seat without scrolling. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

04-01-2014	#200
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Locobob's Interior Mod Thread imho looks somewhat black widowish __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 04-01-2014 at 09:52 PM.