Locobob's Interior Mod Thread

[Locobob]

Originally Posted by tf95ZR1

I turn the V1 sound up all the way, so when it goes off it scares the *)@# out of me and I lift off the gas.
Then I look down to see if the source is in front of me or behind. The bigger issue is where to put the main unit.
It gets too hot on the dash.
I did the Am HC (Pat Scorzetti in FL.) in 2008. I HAD to do something because the "rubber" was lifting off.
I think I mailed him 9 pieces. I like it and it's VERY easy to clean. I'll try to find or take some pictures.
I'm anxiously waiting to see your final interior pictures. Did you take any "safety precautions" dealing with the air bags?

I installed my V1 main unit on the halo, made a bracket that surrounds it and attaches to the halo trim panel just behind and centered between the seats. That way its up high and is relatively unobstructed in all directions. Of course I no longer have the original windshield, if you do it will cut your signal strength a fair amount not utilizing the "radar window".

For the steering wheel pull I disconnected the battery and unplugged the SIR harness under the dash. I removed the module carefully and avoided placing myself in front of it.